Acceptance Mark

Official PayPal Seal



(Your shopping cart is empty)
You are here: Home > Wheels

GENUINE FORD RACING WHEELS

"PUT A FORD ON YOUR FORD"

FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) standards: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrome testing. These standards define a series of tests that ensure the safety and finish of a wheel.

THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS.

IMPACT TESTING
This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection.  The mass of the weight is determined by a formula, using the vehicle weight. 

DYNAMIC CORNERING FATIGUE TESTING

This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. 

DYNAMIC RADIAL FATIGUE TESTING

This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight. 

CHROME QUALITY TESTING

Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

Sort By
Page of 3
FORD RACING WHEEL NUTS (5 PACK) -- M-1012-G 2005-2013 Mustang GT Silver Finish Wheel -- M-1007-T178S
Our Price:$5.00

(2)
Our Price:$140.00
FORD RACING WHEEL NUTS (5 PACK) -- M-1012-G 2005-2013 Mustang GT Silver Finish Wheel -- M-1007-T178S
  • Service replacement for the Mustang FR500S and BOSS 302S race car.
  • 1/2"-20 thread plated steel cone seat lug nuts
  • Open-ended for use with long wheelstuds
  • 13/16" hex
  • Fits 2005-2013 Mustang and most other 1/2"-20 applications
  • Fits 2005-2014 Mustang GT, 2005-2013 Mustang V6
  • 17" x 8" wide
  • 5 lug, 4.5" bolt circle
  • 45mm offset
  • 6.3" backspacing
  • Silver painted spokes with machined wheel lip
  • Clear coated to OEM standards
  • Includes Mustang center cap M-1096-A
  • Fits 2005-2010 Mustang V6 with 2005-2010 Mustang V6 Brake Upgrade Kit M-2300-D
  • Will not clear OEM Brembo Brake option or Ford Racing M-2300-S Brembo brake package
  • Not TPMS Compatible

Note: For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA
For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA
2005-2009 Mustang Bullitt Special Edition Black Finish Wheel 2004 SVT FOCUS WHEEL
Our Price:$158.00

(1)
Our Price:$169.95

(1)
2005-2009 Mustang Bullitt Special Edition Black Finish Wheel 2004 SVT FOCUS WHEEL
  • Fits 2005-2014 Mustang GT, 2005-2013 Mustang V6
  • 17" x 8" wide
  • 5 lug, 4.5" bolt circle
  • 45mm offset
  • 6.30" backspacing
  • Black painted spokes with machined wheel lip
  • Clear coated to OEM standards
  • Includes Mustang center cap M-1096-A
  • Fits 2005-2010 Mustang V6 with 2005-2010 Mustang V6 Brake Upgrade Kit M-2300-D
  • Will not clear OEM Brembo Brake option or Ford Racing M-2300-S Brembo brake package
  • Not TPMS Compatible

Note: For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA
For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA
  • Fits 2000-2007
  • Original equipment on the 2003-2004 SVT Focus
  • 4-lug, 108 mm bolt circle
  • 5.94" backspacing
  • 49mm offset
  • 17" x 7" wide
  • Includes SVT center cap
2003 DARK ARGENT SVT FOCUS EUROPEAN APPEARANCE PACKAGE 15-SPOKE WHEEL -- M-1007-S177E FORD RACING 15 SPOKE FIESTA WHEEL -- M-1007-FA
Our Price:$169.95
Our Price:$169.95
2003 DARK ARGENT SVT FOCUS EUROPEAN APPEARANCE PACKAGE 15-SPOKE WHEEL -- M-1007-S177E FORD RACING 15 SPOKE FIESTA WHEEL -- M-1007-FA
  • 2000-2011 Focus
  • 17" x 7" wide
  • 4-lug, 108mm bolt circle
  • 49mm offset
  • 5.94" backspacing
  • Includes SVT center cap
  • Original equipment on the SVT Focus with Euro Appearance Package
  • Clears M-2300-SVTF5 (300mm) brake kit
  • Not TPMS Compatible
  • 2011-2014 Fiesta sedan and hatchback
  • 2000-2011 Focus
  • 17" x 7" wide
  • 4 lug, 108mm bolt circle
  • 49 mm offset
  • 6" backspacing
  • Dark Stainless Paint Finish
  • Clear coated to OEM standards
  • Includes Ford Racing center cap
  • Valve Stem TPMS Compatible
FORD RACING MUSTANG MATTE BLACK WHEEL 18" x 8 " -- M-1007-P188MB 2005-2009 Mustang GT Black Painted 18 inch Wheel
Our Price:$169.95
Our Price:$170.00
FORD RACING MUSTANG MATTE BLACK WHEEL 18" x 8 " -- M-1007-P188MB 2005-2009 Mustang GT Black Painted 18 inch Wheel
  • Fits 2005-2014 Mustang GT and 2005-2014 Mustang V6
  • 18" x 8" wide
  • 5-lug 4.5" bolt circle
  • 40mm offset
  • 6.25-inch backspacing
  • Mesh spoke design
  • Cast aluminum with matte black paint finish
  • Vehicles with Ford Racing or OEM Brembo Brake option MUST use 1 inch wheel spacers for proper caliper clearance.
  • Includes Ford Racing center cap
  • Band and valve stem TPMS compatible.  Does not include TPMS sensors.
  • TPMS Sensors and Activation Tool sold separately
  • Fits: 2005-2014 Mustang GT, 2005-2014 Mustang V6
  • 18" x 8.5" wide
  • 5-lug, 4.5" bolt circle
  • 50 mm offset
  • 6.82" backspacing
  • Black painted spokes with machined lip
  • Clear coated to OEM standards
  • Includes Mustang center cap M-1096-A
  • Fits 2005-2010 Mustang V6 with 2005-2010 Mustang V6 Brake Upgrade Kit M-2300-D
  • Valve Stem TPMS Compatible
  • Vehicles with Ford Racing (M-2300-S) or OEM 4 Piston 14 Inch Brembo Front Brake option must use 1 inch wheel spacer for proper caliper clearance.

Note: For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA

2002-2003 SILVER SVT FOCUS WHEEL F-150 SVT RAPTOR BEAD LOCK RING WITH FASTENERS -- M-1021-F15RA
Our Price:$175.00

(1)
Our Price:$179.00
2002-2003 SILVER SVT FOCUS WHEEL F-150 SVT RAPTOR BEAD LOCK RING WITH FASTENERS -- M-1021-F15RA
  • Fits 2000-2011 Focus
  • 4-lug, 108mm bolt circle
  • 5.94" backspacing
  • 49mm offset
  • 17" x 7" wide
  • Includes SVT center cap
  • Original equipment on the 2003 SVT Focus
  • Not TPMS Compatible
  • Fits: 2013 F-150 SVT Raptor with factory bead-lock wheel option (64A)
  • Includes aluminum bead-lock ring, 24 fasteners, and mounting instructions
  • Bead-lock configuration is for off-road use only
  • SOLD INDIVIDUALLY
BLACK SVT FOCUS 15-SPOKE WHEEL -- M-1007-S177B 2010 SHELBY GT500 18 X 9.5 INCH CONVERTIBLE CAST ALUMINUM WHEEL -- M-1007-DC1895
Our Price:$195.95
Local Ford Dealer's Price:$746.93
Our Price:$214.95
You save $531.98!

(1)
BLACK SVT FOCUS 15-SPOKE WHEEL -- M-1007-S177B 2010 SHELBY GT500 18 X 9.5 INCH CONVERTIBLE CAST ALUMINUM WHEEL -- M-1007-DC1895
  • Fits 2000-2011
  • 4-lug, 108 mm bolt circle
  • 5.94" backspacing
  • 49mm offset
  • 17" x 7" wide
  • Includes Ford Racing center cap
  • Same as M-1007-S177E except painted black
  • Not TPMS Compatible
  • Fits the following vehicles:
    • 2005-2014 Mustang GT
    • 2007-2012 Mustang SVT GT500
    • 2010-2014 Mustang V6
    • Does not fit 2013-2014 Shelby GT500
  • 5-lug, 4.5" bolt circle
  • 7.125" backspacing
  • 45mm offset
  • 18" x 9.5" wide
  • INCLUDES the SVT center cap M-1096-N
  • Same as production wheel on 2010 Shelby GT500 convertible (Ford OEM wheel part number AR3V-1007-AA)
  • Ford oval and part number cast into the back of the wheel.  Not a replica or knock-off.
  • Conforms to Ford's strict OEM standards for impact strength and finish quality.
  • Cast Aluminum 
  • Bright machined spokes and wheel face with DARK CHARCOAL color wheel openings
  • Clear coated to OEM standards
  • Band TPMS sensor compatible. Does not include TPMS sensors.
  • Fits M-2300-S Shelby GT500 Brembo brake kit
  • Beautiful wheels at a bargain price.
  • Brand new. Never mounted.  Original Ford Wheels.  Not a cheap replica.
2007-2009 Shelby GT500 Wheel -- M-1007-S1895 2007-2009 Shelby GT500 Black Wheels with Machined Lip -- M-1007-S1895B1
Local Ford Dealer's Price:$634.47
Our Price:$224.00
You save $410.47!

(4)
Local Ford Dealer's Price:$634.47
Our Price:$224.00
You save $410.47!
2007-2009 Shelby GT500 Wheel -- M-1007-S1895 2007-2009 Shelby GT500 Black Wheels with Machined Lip -- M-1007-S1895B1
  • 2005-2014 Mustang GT, 2005-2014 V6 and the 2007-2012 Shelby GT500

  • 18" x 9.5" wide

  • 5-lug, 4.5" bolt circle

  • 45 mm offset

  • 7.125" backspacing

  • Clears OEM Brembo Brakes and Ford Racing Brake kit M-2300-S
  • Includes SVT center cap

  • Identical part number as production wheel 2007-2009 Shelby GT500 (same OEM part number and Ford oval on the back casting). Ford Racing uses a different catalog part number system but these are the same OEM wheel, not a replica.

  • Manufactured in batches, wheel color may not match pre-existing factory wheels on your GT500. We recommend buying a set for picky customers that want all four wheels to match.

  • Band TPMS Compatible. Does not include TPMS sensors.

  • Not compatible with valve stem mount TPMS

Note: For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA

  • Fits 2005-2014 Mustang GT, 2005-2014 Mustang V6, and the 2007-2012 Shelby GT500
  • 5-lug, 4.5" bolt circle
  • 7.125" backspacing
  • 45 mm offset
  • 18" x 9.5" wide
  • Includes SVT center cap
  • Clears OEM Brembo Brakes and Ford Racing Brake kit M-2300-S
  • Same as production 2007-2009 Shelby GT500 except wheel face is gloss black with a machined lip.
  • Band TPMS compatible. Does not include TPMS sensors.
  • Not compatible with Valve Stem TPMS.
Note: For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA
For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA
2012-2014 FOCUS ST WHEEL 18" GLOSS BLACK -- M-1007-M188GB FOCUS 18" MATTE BLACK WHEEL -- M-1007-PF188MB
Our Price:$229.00
Our Price:$239.00
2012-2014 FOCUS ST WHEEL 18" GLOSS BLACK -- M-1007-M188GB FOCUS 18" MATTE BLACK WHEEL -- M-1007-PF188MB
  • 2012-2014 Ford Focus
  • Same wheel as the Focus ST cast aluminum wheel but has a gloss black finish and clearcoat
  • Ford Racing does not offer the OEM Focus ST wheel, only the one in the gloss black finish.
  • 18" x 8" wide
  • 5-lug, 108mm bolt circle
  • Includes Ford blue oval center cap
  • Valve Stem TPMS compatible
  • 2012-2014 Ford Focus
  • 18" x 8" wide
  • 5-lug, 108 mm bolt circle
  • 55mm offset
  • 171mm backspacing
  • Matte black finish
  • Includes Ford Blue Oval center cap
  • Valve stem TPMS compatible
FORD RACING MUSTANG SPYDER WHEEL 20" x 8.5 " -- M-1007-P2085LN FORD RACING 2005-2014 MUSTANG GT 19 INCH TRACK PACK WHEEL -- M-1007-DC199B
Our Price:$239.95
List:$279.95
Introductory Special:$249.95
You save $30.00!
FORD RACING MUSTANG SPYDER WHEEL 20" x 8.5 " -- M-1007-P2085LN FORD RACING 2005-2014 MUSTANG GT 19 INCH TRACK PACK WHEEL -- M-1007-DC199B
  • 2005-2014 Mustang GT and 2005-2014 Mustang V6
  • 20" x 8.5" wide
  • 5-lug 4.5" bolt circle
  • 50 mm offset
  • 6.8" backspacing
  • Mesh spoke design
  • Cast aluminum with luster nickel paint finish
  • Clear coated to OEM standards
  • Not for use with OEM Mustang Brembo brakes or M-2300-S Brake Kit
  • Includes Ford Racing center cap M-1096-FR1
  • Band and valve stem TPMS compatible
  • 2005-2014 Mustang GT, 2007-2012 Shelby GT500 and 2005-2014 Mustang V6
  • 19"x9" wide
  • 5-lug, 4.5" bolt circle
  • 42mm offset
  • 6.8" backspacing
  • Same as 2011-2013 Mustang GT Track Pack Wheel with gloss black finish
  • Includes Mustang Bar and Pony center cap M-1096-A
  • Clears OEM 14" Brembo brakes and M-2300-S Brake Kit
  • Valve stem TPMS compatible
FORD RACING MUSTANG BOSS 302S FRONT WHEEL BLACK WITH MACHINED FACE -- M-1007-DC199LGB FORD RACING MUSTANG BOSS 302S REAR WHEEL BLACK WITH MACHINED FACE -- M-1007-DC1910LGB
Local Ford Dealer's Price:$888.78
Introductory Special:$249.95
You save $638.83!

(1)
Local Ford Dealer's Price:$841.62
Introductory Special:$249.95
You save $591.67!
FORD RACING MUSTANG BOSS 302S FRONT WHEEL BLACK WITH MACHINED FACE -- M-1007-DC199LGB FORD RACING MUSTANG BOSS 302S REAR WHEEL BLACK WITH MACHINED FACE -- M-1007-DC1910LGB
  • 2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
  • Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
  • 19" x 9" wide
  • 5-lug, 4.5" bolt circle
  • 42 mm offset
  • 6.7" backspacing
  • Machined face with gloss black accents
  • Clear coated to OEM standards
  • Includes Mustang Bar and Pony center cap M-1096-A
  • Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
  • Valve stem TPMS compatible
  • 2005 - 2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
  • Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
  • 19" x 10" wide
  • 5-lug, 4.5" bolt circle
  • 47.5 mm offset
  • 7.4" backspacing
  • Machined face with gloss black accents
  • Clear coated to OEM standards
  • Includes Mustang Bar and Pony center cap M-1096-A
  • Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
  • Valve stem TPMS compatible
   
 
Ford Racing Parts Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback