Includes:
- Ford Racing 10.5 inch heavy duty 26 spline clutch disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. Not recommended for use with stock pressure plates. Please use M-7560-B302 Ford Racing Pressure Plate or equivalent for proper engagement.
This 10.5 inch clutch disc is required for use with applications using a 26 spline input shaft Tremec transmission.
Compatible with the following transmissions and flywheels:
- M-7003-R58C Tremec TKO 600 Transmission
- M-7003-R58H Tremec TKO 600 Transmission
- Production and Ford Racing 10.5" Flywheels
NOTES:
- Clutches have NO warranty!
- Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with Tremec 3650 transmission and 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel. Metric fasteners and dowel pins must be used with 10.5" clutches.
|
- Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions.
- Consists of clutch disc and pressure plate
- Heavy duty diaphragm type clutch assembly with 25 % more capacity than stock Mustang clutch.
- Clutch disc has 1.0625"-10 spline hub.
- OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur.
- Metric fasteners and dowel pins must be used with 10.5" clutches.
- Clutches have NO warranty!
- Also recommended Throwout Bearing M-7548-A, Pressure Plate Bolt and Dowel Kit M-6397-A302, Roller Pilot Bearing M-7600-A or M-7600-B.
|
