|
FORD RACING FL-1A HIGH-PERFORMANCE OIL FILTER (single filter) -- CM-6731-FL1A
|
|
FORD RACING FENDER COVER -- M-1822-A2
|
|
Our Price: $15.95
|
|
|
|
Our Price: $15.95
|
|
|
|
|
- Upgraded Direct Replacement for Motorcraft FL-1A oil filter.
So any application that uses a Motorcraft FL-820S oil filter can benefit
from using this upgraded oil filter.
- Synthetic-Polymer/Cellulose-Fiber blend media
- Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance
- High-quality silicone anti-drain back valve
- Non-stick sealing gasket for ease of installation and removal
- Long life with standard and synthetic motor oils
- Up to 50% more filtering capacity than standard filters
- Improved filtering efficiency
- This technology is only available through Ford Racing Performance Parts
- Click Here for a Complete Vehicle Application Fitment List
|
Protect that beautiful paint job from scratches, chemicals and oil with this strong, sturdy and slip-resistant "Ford Racing" fender cover. Measures 27'' x 36'' and is acid and grease resistant. Features handy "ridged" area in which to place small tools and parts.
|
|
|
|
Ford Racing Small Block Performance Intake Manifold Gasket Set
|
|
Ford Racing 9MM 5.0L/5.8L OHV V8 Blue Spark Plug Wire Set
|
|
Our Price: $44.95
|
|
|
|
Our Price: $48.95
|
|
|
|
|
INTAKE MANIFOLD GASKETS (SOLD IN PKG. OF 2)
NOTE: None of the following race quality gasket kits include rubber end seals. Use RTV sealer or production end seals.
| PART NUMBER | MANIFOLD APPLICATION | PRINT-O-SEAL | GASKET THICKNESS .004 | | M-9439-A50* | All | Yes | 0.070" |
| PART NUMBER | CYLINDER HEAD APPLICATION | PRINT-O-SEAL | GASKET THICKNESS .004 | | M-9439-A50* | M-6049-L302/L303/X302/X303/X304/X305/Y302/Y303/X306/X307/Z304/Z304A/Z304D/Z304DA with or without EGR 1 2 3 | Yes | 0.070" |
NOTE:
1 Synthetic rubber Print-O-Seal (Fel Pro Inc.) bead around ports provides improved sealing.
2 Redesigned for improved port location and allows mild porting.
3 Teflon coated, steel reinforced.
|
Wire-wound custom ignition wire sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents.
Long-life, tough stainless steel terminals for"post" type distributor caps. Includes coil wire for socket-type coil and"Ford Racing" identification. Cylinder number appears on each wire.
DOES NOT FIT 5.0L COYOTE DOHC ENGINE
Custom High Performance Spark Plug Wire Set Featuring:
- Premium Silicone Jacketing
- Fiberglass Braid
- Performance Proven Spiral Core
- Specially Formulated Silicone Insulation
- Premium Spark Plug Boots
- Snap Ring Terminals
- Custom Designed Distributor Boots and Terminals
- Laser Controlled Manufacturing
|
|
|
|
FORD RACING REVERSE ROTATION SERPENTINE WATER PUMP
|
|
FORD RACING STANDARD ROTATION V-BELT WATER PUMP
|
|
Our Price: $48.95
|
|
|
|
Our Price: $61.95
|
|
|
|
|
- Reverse rotation serpentine belt aluminum water pump for 1986-1993 5.0L/5.8L engines
- Standard shaft and bearing with stamped impeller
- Provides good flow and pressure for engines that operate below 6000 RPM
- Can be used on 1979-1985 with minor modifications
|
- Standard rotation V-belt aluminum water pump for 5.0L/5.8L engines
- Standard shaft and bearing with stamped impeller
- Provides good flow and pressure for engines that operate below 6000 RPM
- Can be used with M-6059-D351 timing chain cover or stock V-belt timing cover
|
|
|
|
Ford Racing 9MM 4.6L 2V V8 Blue Spark Plug Wire Set
|
|
Ford Racing 3 Valve Zero Degree 12MM Spark Plugs
|
|
Our Price: $82.95
|
|
|
|
Our Price: $92.95
|
|
|
|
|
Wire-wound custom ignition wire sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents.
Long-life, tough stainless steel terminals for"post" type distributor caps. Includes coil wire for socket-type coil and"Ford Racing" identification. Cylinder number appears on each wire.
Custom High Performance Spark Plug Wire Set Featuring:
- Premium Silicone Jacketing
- Fiberglass Braid
- Performance Proven Spiral Core
- Specially Formulated Silicone Insulation
- Premium Spark Plug Boots
- Snap Ring Terminals
- Custom Designed Distributor Boots and Terminals
- Laser Controlled Manufacturing
|
- For use in engines with higher than stock cylinder combustion pressures
- One heat range colder than the stock Mustang GT plug
- Two heat ranges colder than the stock 5.4L truck 3-valve engine
- Sold in engine sets of 8
- Fits 2008 and newer 3V heads requiring the 12mm thread
Note: Engines with late style 12MM spark plugs can be identified by coil engineering number 8L3E
Engines with early style 16mm "High Thread" design spark plugs can be identified by coil engineering number 3L3E part number
|
|
|
|
Ford Racing 3 Valve Zero Degree Spark Plugs
|
|
FORD RACING STREET ROD SHORT V-BELT WATER PUMP
|
|
Our Price: $140.00
|
|
|
|
Our Price: $140.00
|
|
|
|
|
- For use in engines with higher than stock cylinder combustion pressures
- Unique design is proprietary to Ford 3-valve engines
- One heat range colder than the stock Mustang GT plug
- Two heat ranges colder than the stock 5.4L truck 3-valve engine
- Sold in engine sets of 8
- Fits all 3V heads requiring "High Thread" design spark plugs
|
- Driver's-side radiator hose inlet
- Provides approx. 1.5" of space at the front of the engine
allowing for more radiator to fan clearance without a recessed fire
wall
- Must use with long style (3.950") 4-bolt damper. Can also use M-6316-A50 or M-6316-C351 with appropriate spacer. See pages 85
- .750" pulley pilot shaft
- Fits M-6059-D351 timing chain cover
|
|
|
|
FORD RACING HIGH-PERFORMANCE FL-1A OIL FILTER (case of 12) -- M-6731-FL1A
|
|
FORD RACING REVERSE ROTATION SHORT SERPENTINE WATER PUMP
|
|
Our Price: $165.00
|
|
|
|
Our Price: $205.00
|
|
|
|
|
|
- Upgraded Direct Replacement for Motorcraft FL-1A oil filter.
So any application that uses a Motorcraft FL-820S oil filter can benefit
from using this upgraded oil filter.
- Synthetic-Polymer/Cellulose-Fiber blend media
- Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance
- High-quality silicone anti-drain back valve
- Non-stick sealing gasket for ease of installation and removal
- Long life with standard and synthetic motor oils
- Up to 50% more filtering capacity than standard filters
- Improved filtering efficiency
- This technology is only available through Ford Racing Performance Parts
- Click Here for a Complete Vehicle Application Fitment List
|
- Engine overall length from front of water pump to back of block is 27"
- Serpentine belt, reverse rotation, approx. 1.75" shorter than old style pumps (M-8501-C50)
- Kit includes special timing chain cover with short water pump and gaskets. Driver side radiator hose inlet
- Meets OEM specifications for water flow
- A V-8 water pump for a V-8 engine. Must use electric fuel pump
|
|
|
|
Ford Racing Blue 3-Valve Engine Valve Covers
|
|
Ford Racing Black 3-Valve Engine Valve Covers
|
|
Our Price: $269.00
|
|
|
|
Our Price: $269.00
|
|
|
|
|
- Fits 2005-2010 3-valve 4.6L and 5.4L engines
- Powdercoated blue finish
|
- Fits 2005-2010 3-valve 4.6L and 5.4L engines
- Powdercoated black finish
|
|
|
|
Laser Etched Blue "Ford Racing" 3-Valve Engine Valve Covers -- M-6582-FR3VBL
|
|
Laser Etched Black "Ford Racing" 3-Valve Engine Valve Covers -- M-6582-FR3VBLK
|
|
Our Price: $309.00
|
|
|
|
Our Price: $309.00
|
|
|
|
|
- Fits 2005-2010 3-valve 4.6L and 5.4L engines
- Powdercoated blue finish
- Laser Etched Ford Racing Logo
- Includes cam cover gasket
|
- Fits 2005-2010 3-valve 4.6L and 5.4L engines
- Powdercoated black finish
- Laser Etched Ford Racing Logo
- Includes cam cover gasket
|
|
|
|
BLACK 6.2L V8 "POWERED BY FORD" VALVE COVERS -- M-6582-62BK
|
|
BLUE 6.2L V8 "POWERED BY FORD" VALVE COVERS -- M-6582-62BL
|
|
Our Price: $309.95
|
|
|
|
Our Price: $309.95
|
|
|
|
|
- Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
- Powder coated, Magnesium cam covers
- Includes fasteners, grommets, gaskets and camshaft position sensor grommets
- Color compliments Tuxedo Black body color
|
- Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
- Powder coated, Magnesium cam covers
- Includes fasteners, grommets, gaskets and camshaft position sensor grommets
- Color compliments Blue Flame body color
|
|
|
|
SILVER 6.2L V8 "POWERED BY FORD" VALVE COVERS -- M-6582-62SL
|
|
WHITE 6.2L V8 "POWERED BY FORD" VALVE COVERS -- M-6582-62WH
|
|
Our Price: $309.95
|
|
|
|
Our Price: $309.95
|
|
|
|
|
- Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
- Powder coated, Magnesium cam covers
- Includes fasteners, grommets, gaskets and camshaft position sensor grommets
- Color compliments Silver body color
|
- Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
- Powder coated, Magnesium cam covers
- Includes fasteners, grommets, gaskets and camshaft position sensor grommets
- Color compliments Oxford White body color
|
|
|
