• Fits Ford Racing's Boss 302/351 and production 351W blocks
• 1/2 inch main bolt with 3/8 stud, provides attachment point for rear sump pickup tube support bracket.
• Under hex length 3.450"  Hex head thickness .540"  3/8 stud length .650"
• Limited Supply

Easy upgrade to enhance the appearance of your 2005-2008 Mustang

• Fits in the existing Power Point located in the center of the dash
  
• Turn the key to the on position then press the button
  
• Includes special wire harness for easy installation

• Fits Ford Racing's Boss 302/351 and production 351W blocks
• 1/2 inch main bolt with 3/8 stud, provides attachment point for rear sump pickup tube support bracket.
• Under hex length 3.450" Hex head thickness .540" 3/8 stud length .650"
• Box of 100
  
• Limited Supply

• Fits 2007-2009 SVT Mustang
  
• Fits 2005-2009 Mustangs with the M-2300-S Ford Racing Shelby GT500 Brembo brake kit installed
  
• Includes powdercoated backing plates and 2.5-inch dual wall silicone brake ducting temperature rated at 550 degrees F.
• Designed to direct air from the fascia to the rotor for improved brake and wheel bearing life
• Made with high race quality high temperature components superior to other brands.
• A great upgrade for cars used on track days and where spirited driving results in brake fade.
• This kit greatly reduces brake fade and increases brake and wheel durability.
  
• Standard equipment on the Shelby GT500KR

Kit Includes:

• 2 Black Powdercoated brake backing plates
• 4 Hose Clamps
• 2 Duct Hose Brackets (included for Mustang GT installation)
• 2 4 ft. High Temperature Ducts (2.5" diameter)
  
• 8 Rivets
• 8 Bolts
• 4 Straps

• Original equipment on the Ford GT 5.4L DOHC
  
• Fits most 4.6L/5.4L DOHC engines with coil on plug ignition

• BRAND NEW IN THE BOX
• VERY HARD TO FIND.  OUT OF PRODUCTION
• Polished aluminum shift knob with GT logo and shift pattern
• Includes decorative sleeve for shift lever
  

• Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
  
• Powder coated, Magnesium cam covers
• Includes fasteners, grommets, gaskets and camshaft position sensor grommets
• Color compliments Molten Orange body color

• Free 3 Day Priority Shipping. In Stock and Ready to Ship.
• Very Limited Part. Not mass produced. Only 50 units made per month.
  
• The most powerful cams available that are safe with the production valvetrain. No cam phaser lockouts needed. Use of the stock valve springs IS recommended.
  
• Excellent upgrade for the 2005-2010 Mustang GT 4.6L 3V engine
  
• 50hp gain(SAE-J1349)with the stock intake and M-6049-N3VPA CNC heads at 6500 rpm. 30hp gain without CNC heads.
  
• This camshaft provides a lopey idle reminiscent of 1960's muscle cars, no other modular camshaft sounds like this.

• Clutch kit as used on 2008 Cobra Jet
• Excellent single disc upgrade for stock 2007-2012 Mustang GT500.
• Why replace the OEM clutch which costs over $1,800 at the dealer when you can upgrade your clutch setup with this proven part that has been tested and approved by Ford Racing engineers for much less.
  

Includes:

Centerforce aluminum flywheel part number 900215

• 164-Tooth, 8-bolt crank bolt pattern
• 13.5 lb.
• SFI Approved for safety
• Half the weight of the OEM flywheel with maintained streetability.
  

Centerforce DFX clutch/pressure plate part number 01570841

• Great Street Driveability
• Great for Street and Strip use.
  
• Ceramic friction clutch material
•  1-1/ 8 in. Diameter Shaft
•  26-Spline
• 11 in. Dia. Disc

1. Clutches have NO warranty!
2. Requires the use of M-6397-A46 pressure plate bolt and dowel kit.