|
FORD RACING 8.8" RING & PINION INSTALLATION KIT STAGE 1
|
|
Ford Racing 8.8" Traction-Lok Rebuild Kit
|
|
List: $40.00
|
|
|
|
List: $82.95
|
|
|
|
|
Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts and cover gasket
Use for changing ring and pinion gear or differential
Fits IRS and Straight Axles
|
- Kit includes clutch pack, shims, friction modifier and instruction sheet
- Fits all 8.8" Traction-Lok differentials
|
|
|
|
FORD RACING 8.8" RING & PINION INSTALLATION KIT STAGE 2
|
|
FORD RACING 8.8" RING & PINION INSTALLATION KIT STAGE 3
|
|
List: $90.00
|
|
|
|
List: $120.00
|
|
|
|
|
Kit includes:
Pinion and carrier shimsCrush sleevePinion sealPinion nutRing gear bolts
Cover gasket
Pinion gear bearing
Carrier bearings
Use for changing ring and pinion gear or differential
Fits IRS and Straight Axle
|
Kit includes:
Pinion and carrier shimsCrush sleevePinion sealPinion nutRing gear bolts
Cover gasket
Axle shaft bearingsAxle shaft sealsPinion gearCarrier bearings
Use for changing ring and pinion gear or differential
Fits 1986 -2004 Mustang for non-IRS axles
|
|
|
|
Ford Racing 8.8" Traction-Lok Rebuild Kit with Carbon Fiber Discs
|
|
FORD RACING 8.8" SVT RING & PINION INSTALLATION KIT
|
|
List: $128.95
|
|
|
|
List: $162.00
|
|
|
|
|
- Kit includes carbon fiber clutch pack, shims, S-spring and instruction sheet
- Fits all 8.8" Traction-Lok differentials
- Carbon fiber discs are designed for higher torque usage
- Used in 2003-2008 SVT Mustangs
|
Fits 2007-2010 Shelby GT500 and 2008 Bullitt
Kit includes:
Pinion and carrier shimsCrush sleevePinion sealPinion nutRing gear bolts
Cover gasket
High-torque pinion bearing
Carrier bearings
Use for changing ring and pinion gear or differential
|
|
|
|
Mustang 4.10 8.8" Ring and Pinion Gear Set
|
|
Mustang 3.73 8.8" Ring and Pinion Gear Set
|
|
List: $179.95
|
|
|
|
List: $179.95
|
|
|
|
|
- 4.10:1 Gear set for 8.8" Ring and Pinion Axles
- Much quicker vehicle acceleration
- Reaches torque band quicker
- Precision quality and fit by Ford Racing
|
- 3.73:1 Gear set for 8.8" Ring and Pinion Axles
- Much quicker vehicle acceleration
- Reaches torque band quicker
- Precision quality and fit by Ford Racing
- Standard equipment on the Shelby GT500KR
|
|
|
|
Ford Racing 3.55 8.8" Ring and Pinion Gear Set -- M-G355A
|
|
Ford Racing 2005-2010 Mustang Axle Girdle
|
|
List: $179.95
|
|
|
|
List: $199.00
|
|
|
|
|
|
Ford Racing offers the highest quality and best value gear sets on the market. This 3.55 gear set will make your Ford Mustang quicker off the line and get to the power band faster. FRPP gear sets for the Ford Mustang are precision machined for the best fit and use strong materials for long lasting performance. FRPP gear sets are designed to take the abuse. When swapping gears, we recommend that you also purchase a FRPP Traction-Lok rebuild kit and Ford Racing's Ring and Pinion Installation Kit.
|
- Low profile design to fit the 2005-2010 Mustang GT and 2007-2010 Shelby GT500
- Lightweight 356 T6 aluminum casting replaces rear cover on 8.8" rear axle
- Load bolts provide additional support for differential bearing caps
- Increase ring and pinion gear life
|
|
|
|
Mustang 4.30 8.8" Ring and Pinion Gear Set
|
|
Ford Racing 2005-2010 Mustang GT 3.55 Axle Assembly
|
|
List: $199.00
|
|
|
List: $1,449.00
Sale Price: $1,099.00
You save $350.00!
|
|
|
|
|
|
- 4.30:1 Gear set for 8.8" Ring and Pinion Axles
- Much quicker vehicle acceleration
- Reaches torque band quicker
- Precision quality and fit by Ford Racing
|
- Production 2005-2010 Mustang GT 8.8 inch axle assembly
- 31 spline axles and Trac-Lok differential
- 3.55:1 ring and pinion gear ratio installed
- Includes axle shafts
|
|
|
