• Brake line kit used on 2012 Mustang Boss 302 
• Also fits 2005-2012 Mustang GT (incl. Brembo package) and 2007-2012 SVT Mustang
• Low expansion rubber lines
• Improved flexibility
• Front and rear lines included

• Fits 2005-2010 V6 Mustang
  
• Upgrades Mustang V6 11.5" front rotors to the larger Mustang GT 12.4" rotors for increased stopping power.
  
• Uses existing calipers and brake pads
  
• Easily installed, no bleeding required
  
• Requires 17" or larger 2005-2010 Mustang wheels such as M-1007-T178C for caliper clearance
  
• Allows use of M-1007-S1885, M-1007-S1885B, and M-1007-S1885C 18" style wheels on Mustang V6

• Includes powdercoated backing plates and 3-inch dual wall silicone brake ducting temperature rated at 550 degrees F
• Designed to fit 2010-2012 GT/CS lower fascia insert fog lamp opening
• Reduces front brake temperature by ducting air to the brake rotors
• OEM part for the 2012 BOSS 302 Laguna Seca Edition.
  

• Fits 2007-2009 SVT Mustang
  
• Fits 2005-2009 Mustangs with the M-2300-S Ford Racing Shelby GT500 Brembo brake kit installed
  
• Includes powdercoated backing plates and 2.5-inch dual wall silicone brake ducting temperature rated at 550 degrees F.
• Designed to direct air from the fascia to the rotor for improved brake and wheel bearing life
• Made with high race quality high temperature components superior to other brands.
• A great upgrade for cars used on track days and where spirited driving results in brake fade.
• This kit greatly reduces brake fade and increases brake and wheel durability.
  
• Standard equipment on the Shelby GT500KR

Kit Includes:

• 2 Black Powdercoated brake backing plates
• 4 Hose Clamps
• 2 Duct Hose Brackets (included for Mustang GT installation)
• 2 4 ft. High Temperature Ducts (2.5" diameter)
  
• 8 Rivets
• 8 Bolts
• 4 Straps

Looking to add some stopping power to the rear of your classic Ford? Tired of searching through junk yards or settling for mismatched rear disc brake parts? This Ford Racing rear disc brake kit includes OE quality calipers, rotors and mounting components.

• Kit includes 11.8" vented rotors, single piston calipers with integral parking brake, custom mounting brackets and attaching hardware.
• Rotors feature the common 5-hole, 4.5" diameter passenger car bolt pattern with 2.780" center hub
• Mounting brackets fit the popular 8.8" Truck/9" Late Ford axle housings with 2" x 3.56" pattern and big 3.15" diameter bearing.
• This kit is designed for vehicle installations with a 2.5" brake gap (housing flange-to-axle shaft flange).
• E-coated caliper mounting bracket and dust shield
• Due to large 11.8" diameter rotor and floating caliper design, most production and aftermarket 15" wheels will not fit.
• NOTE: Wheel spacers not recommended for use with brake kit
• NOTE: Does not fit Mustang 8.8" axle.
• NOTE: Hoses, tubes, parking brake cables and wheels are NOT included in this kit. Additional parts and machining may be required. For more information, call the Techline at (800) FORD788.

• Complete kit to put larger front brakes on 2000-2004 ZX3/4/5 Focus
• Fits inside 15" wheels
• Includes 278 mm front rotors
• Includes calipers and mounting hardware
• Includes front knuckles
• Designed for the Spec Rally Focus

• Fits 2005-2012 Mustang with Anti-Lock Brakes. For V6 Mustangs without ABS, a brake line hose fitting adapter will need to be sourced separately to attach the included braided stainless steel brake lines.
  
• Kit will upgrade the front brakes to 2007-2012 Shelby GT500 14" rotors and Brembo 4-piston calipers
  
• Includes Shelby GT500 rear pads for use in stock Mustang GT rear calipers
  
• Includes Goodridge DOT four-piece hose kit and attaching parts
  
• Requires 18" Ford OEM Fan Blade Wheels, Shelby GT500 Wheels, or Ford Racing (M-1007-S1895/ M-1007-S1895B1/M-1007-DC1895/M-1007-DC199B/M-1007-SA199/M-1007-SA1910/M-1007-DC199LGB/M-1007-DC1910LGB) wheel or equivalent for caliper clearance.  The 18" Ford OEM Bullitt style wheels will not clear the calipers without front wheel spacers.
  

• Original equipment on 2000 Cobra"R"
  
• Kit includes Brembo 4-piston calipers, brake lines, hardware and "upgraded" slotted rotors
  
• This kit can be used to upgrade the front brakes on 1994-04 GT and 1994-04 Cobra
  
• May require larger wheels like M-1007-R189/R189C/F500/F500C
  Note:1994-95 GT requires 1994 Cobra master cylinder