- 600 lbs./ft. torque capacity
- Gear ratios: 1st 2.87; 2nd 1.90; 3rd 1.34; 4th 1.00; 5th 0.82
- Features
improved shift forks, one-piece counter-shaft, gears made of 4615 steel
which increases the torque capacity over that of the M-7003-R58 model
- Input shaft is 26 spline; output shaft is 31 spline
- Requires bellhousing M-6392-R58 to install in a 1979-95 Mustang
- For 1979-93 Mustang applications, use M-5059-A crossmember (79-81 will require modification)
- For 1994-95 Mustang applications, modify vehicle crossmember, lengthen driveshaft .625'' and use clutch fork E6ZZ-7515-A
- 31 spline driveshaft yoke required, M-4841-A recommended
- Requires unique clutch disc M-7550-T302 (10.5") designed for use with 26 spline input
- Can be used in 4.6L applications with bellhousing M-6392-M46 and Clutch Kit M-7560-T46 (11")
|
- Close ratio 1st through 4th
- 600 lbs./ft. torque capacity
- Gear ratios: 1st 2.87; 2nd 1.90; 3rd 1.34; 4th 1.00; 5th 0.68
- Features
improved shift forks, one-piece counter-shaft, gears made of 4615 steel
which increases the torque capacity over that of the M-7003-R58 model
- Input shaft is 26 spline; output shaft is 31 spline
- Requires bellhousing M-6392-R58 to install in a 1979-95 Mustang
- For 1979-93 Mustang applications, use M-5059-A crossmember (79-81 will require modification)
- For 1994-95 Mustang applications, modify vehicle crossmember, lengthen driveshaft .625'' and use clutch fork E6ZZ-7515-A
- 31 spline driveshaft yoke required, M-4841-A recommended
- Requires unique clutch disc M-7550-T302 (10.5") designed for use with 26 spline input
- Can be used in 4.6L applications with bellhousing M-6392-M46 and Clutch Kit M-7560-T46 (11")
|
