Acceptance Mark

Official PayPal Seal



(Your shopping cart is empty)
You are here: Home > 2007-2009 Shelby GT500 Parts > Superchargers



Ford Racing Supercharger Systems:
The MOST Tested and Proven Supercharger Kits and Calibrations on the Market

  • 100 hours of extreme durability testing
  • Tested in Ford's Climatic (-40F to 131F) and Altitude facility (-282 ft. to 12,000 ft.)
  • Fitted and tested in real world conditions through the Ford Arizona Proving Grounds, high altitude locations, and much more.
  • 50 State Emissions Legal
  • NOW AVAILABLE WITH AN OPTIONAL WARRANTY UP TO 5 YEARS 100,000 MILES
Sort By
Page of 1
Replacement Air Filter for Ford Racing Shelby GT500 Cold Air Intake -- M-9601-D 2007-2012 SHELBY GT500 TVS Supercharger 2.6 Inch Pulley (Adds 4-5 lbs of boost) -- GT 210261
Our Price:$77.00
Our Price:$159.67

(1)
Replacement Air Filter for Ford Racing Shelby GT500 Cold Air Intake -- M-9601-D 2007-2012 SHELBY GT500 TVS Supercharger 2.6 Inch Pulley (Adds 4-5 lbs of boost) -- GT 210261
Replacement air filter for Ford Racing Shelby GT500 Cold Air Intake M-9603-SVT07, Shelby GT500 Power Pack M-2007-FR1SVT, and Shelby GT500 Supercharger Upgrade kit M-6066-SGT.

Filter Dimensions: 6" Diameter Base - 9" Length - 5" Diameter End
These pieces are the highest quality supercharger pulleys for your Shelby GT500. This pulley is a 10-rib 2.6 inch diameter drive pulley for the aftermarket TVS Supercharger. It is meant to have a stock look while allowing you to gain performance with an additional 4 psi of boost on the TVS supercharger.

AFTERMARKET COMPUTER CALIBRATION REQUIRED
As with any supercharger pulley upgrade, an aftermarket computer calibration is required and is not included. The Ford Racing ProCal tuner does not support this supercharger pulley change.

MUST USE GT 9000 IDLER TENSIONER ARM ASSEMBLY
The OEM tensioner arm does not have enough range of motion to ensure proper belt tension. Failure to purchase and install our tensioner arm assembly when using a smaller than stock supercharger pulley will result in belt slippage under acceleration.

Why these pulleys are better

  • Each pulley consists of precision machined grooves to ensure proper fitment with the belt. Inferior designed grooves will rip belts apart. The pulley to belt contact area is a critical design element and the pulley design is the result of many revisions to virtually eliminate slippage.
  • To eliminate the issue of the pulley slipping on the supercharger shaft, these pulleys are honed bore, round & straight within .0002.
  • Proper Lead-in is designed into each pulley to ensure that the it goes on straight.
  • Made In the USA
2007-2012 SHELBY GT500 Stock Supercharger 2.6 Inch Pulley (Adds 4-5 lbs of boost) -- GT 110261 SHELBY GT500 UPGRADED 90MM TENSIONER ARM ASSEMBLY -- GT 9000
Our Price:$159.67
Our Price:$249.97
2007-2012 SHELBY GT500 Stock Supercharger 2.6 Inch Pulley (Adds 4-5 lbs of boost) -- GT 110261 SHELBY GT500 UPGRADED 90MM TENSIONER ARM ASSEMBLY -- GT 9000
These pieces are the highest quality supercharger pulleys for your Shelby GT500. This pulley is a 10-rib 2.6 inch diameter drive pulley for the stock Shelby GT500 Supercharger. It is meant to have a stock look while allowing you to gain performance with an additional 4 psi of boost on the stock supercharger.

AFTERMARKET COMPUTER CALIBRATION REQUIRED
As with any supercharger pulley upgrade, an aftermarket computer calibration is required and is not included. The Ford Racing ProCal tuner does not support this supercharger pulley change.

MUST USE GT 9000 IDLER TENSIONER ARM ASSEMBLY
The OEM tensioner arm does not have enough range of motion to ensure proper belt tension. Failure to purchase and install our tensioner arm assembly when using a smaller than stock supercharger pulley will result in belt slippage under acceleration.

Why these pulleys are better

  • Each pulley consists of precision machined grooves to ensure proper fitment with the belt. Inferior designed grooves will rip belts apart. The pulley to belt contact area is a critical design element and the pulley design is the result of many revisions to virtually eliminate slippage.
  • To eliminate the issue of the pulley slipping on the supercharger shaft, these pulleys are honed bore, round & straight within .0002.
  • Proper Lead-in is designed into each pulley to ensure that the it goes on straight.
  • Made In the USA
  • Components are CNC machined out of high quality aluminum.
  • High quality Type III hard coat anodized finish.
  • True double-bearing setup can withstand anything you throw at it!
  • Will work with ALL available superchargers, including the Kenne Bell!
  • Designed to work with most common supercharger pulleys.
  • Simple installation without modification!
2008-2012 Shelby GT500 Upgraded Crank Damper -- M-6312-SVT 2007-2010 SHELBY GT500 OEM DUAL CORE HEAT EXCHANGER UPGRADE KIT -- M-8229-MSVT
Our Price:$299.00

(2)
List:$399.00
Sale Price:$359.00
You save $40.00!

(1)
2008-2012 Shelby GT500 Upgraded Crank Damper -- M-6312-SVT 2007-2010 SHELBY GT500 OEM DUAL CORE HEAT EXCHANGER UPGRADE KIT -- M-8229-MSVT
  • New factory replacement damper from the 2008-2012 Shelby GT500 5.4L 4V engine
  • 10 lbs lighter than the 2007 factory Shelby GT500 Crankshaft Damper
  • Must be installed on the 2007 Shelby GT500 Mustang when using the M-6066-SGT on 2007 Shelby GT500 to qualify for warranty.
  • Highly recommended for any 2007 Shelby GT500 when upgrading the supercharger.
  • Fits 2007-2012 SHELBY GT500
  • High efficiency production unit from 2011-2012 SHELBY GT500.  OEM fit, finish, and quality.
  • Increased cooling over production 2007-2010 SHELBY GT500
  • Cooler air charge temperatures
  • Less Heat Soak
  • Requires no modifications to install
  • Includes brackets and mounts
  • Approximate install time of 4 hours
  • Works great to compliment the Ford Racing upgraded high performance intercooler and Ford Racing Twin Screw 725-750HP Supercharger Upgrade kits.
FORD RACING UPGRADED 5.4L GT500 ALUMINUM INTERCOOLER -- M-6775-MSVT 2007-2012 GT500 2.3L TVS SUPERCHARGER TUNER KIT -- M-6066-MSVT23
Our Price:$995.00
List Price:$3,329.00
Our Price:$2,995.00
You save $334.00!
FORD RACING UPGRADED 5.4L GT500 ALUMINUM INTERCOOLER -- M-6775-MSVT 2007-2012 GT500 2.3L TVS SUPERCHARGER TUNER KIT -- M-6066-MSVT23
  • Fits 2007-2013 Mustang Shelby GT500 5.4L and 5.8L 4V engine
  • Excellent upgrade for prior model 2007-2012 GT500 and 5.4L Cobra Jet Mustangs
  • Freer flowing with less restriction and more efficient heat extraction than the production intercooler resulting in a cooler air charge and more power.  This more efficient intercooler also reduces heat soak and power drop-off.
  • This upgraded intercooler is an OEM production quality piece and is designed to replace the stock intercooler located inside the intake manifold underneath the supercharger compressor.
  • A great piece to compliment the installation of the Ford Racing Twin Screw 725-750HP supercharger kits.  Why not upgrade the intercooler while your swapping the compressor right?
  • Aluminum construction
  • Standard equipment on 2013 GT500 5.8L 4V
  • Includes supercharger and charge cooler gasket and o-rings
  • Fits: 2007-2012 Mustang Shelby GT500 5.4L engine
  • Makes 15psi of boost in 2013 GT500.
  • Production TVS Supercharger unit from the 2013 Mustang Shelby GT500 program
  • Custom Aftermarket PCM tune required. Ford Racing ProCal tool does not support this kit.
  • Does not include sensors.
  • Supercharger belt may not work for all GT500 model years, custom belt may be required

Kit includes:

  • 2.3L Twin Vortices Series (TVS) supercharger features 4-lobe rotors with 160 degree twist and 68 mm pulley (2.67 inches) pre-installed
  • Ford Racing Polished Billet Aluminum Cobra Jet Oval Monoblade Throttle Body (flows 1797cfm) M-9926-SCJ
  • 2013 GT500 Production Supercharger to throttle body elbow. This elbow is 33% larger than the 2007-2012 GT500 inlet elbow.
  • 2013 GT500 Supercharger Belt
  • Fuel rail with crossover, P/N DR3Z-9F792-B , provides adequate clearance to supercharger
  • Fuel injector retainer clips
2007-2012 GT500 2.3L TVS SUPERCHARGER TUNER KIT WITH 65MM THROTTLE BODY -- M-6066-MSVT2365 2007-2010 SHELBY GT500 2.9L WHIPPLE SUPERCHARGER ASSEMBLY BLACK WRINKLE FINISH -- M-6066-MSVT29T
List Price:$3,599.00
Our Price:$3,199.00
You save $400.00!
List:$4,399.00
Introductory Special:$3,999.00
You save $400.00!
2007-2012 GT500 2.3L TVS SUPERCHARGER TUNER KIT WITH 65MM THROTTLE BODY -- M-6066-MSVT2365 2007-2010 SHELBY GT500 2.9L WHIPPLE SUPERCHARGER ASSEMBLY BLACK WRINKLE FINISH -- M-6066-MSVT29T
  • Fits: 2007-2012 Mustang Shelby GT500 5.4L engine
  • Makes 15psi of boost in 2013 GT500.
  • Production TVS Supercharger unit from the 2013 Mustang Shelby GT500 program
  • Custom Aftermarket PCM tune required. Ford Racing ProCal tool does not support this kit.
  • Does not include sensors.
  • Supercharger belt may not work for all GT500 model years, custom belt may be required

Kit includes:

  • 2.3L Twin Vortices Series (TVS) supercharger features 4-lobe rotors with 160 degree twist and 68 mm pulley (2.67 inches) pre-installed
  • Cobra Jet Dual 65mm Throttle Body M-9926-CJ65 improves idle and low-end response compared to mono blade oval throttle body
  • 2013 GT500 Production Supercharger to throttle body elbow. This elbow is 33% larger than the 2007-2012 GT500 inlet elbow.
  • 2013 GT500 Supercharger Belt
  • Fuel rail with crossover, P/N DR3Z-9F792-B , provides adequate clearance to supercharger
  • Fuel injector retainer clips
  • Fits 5.4L DOHC 2007-2010 Shelby GT500
  • 2.9 Liter Twin-Screw supercharger with 3-inch pulley
  • Black Wrinkle Finish
  • At comparable boost levels the unit delivers more power, cooler charge temps, and less parasitic loss than stock supercharger
  • Supercharger Only
  • Does not include open element cold air intake system
  • Uses OEM supercharger belt
  • Calibration Not Included (Recalibration of computer is mandatory to prevent engine damage)
  • Premium
    fuel required
  • Damper upgrade M-6312-SVT strongly recommended for 2007 SVT Mustangs to prevent crankshaft failure  
2007-2010 SHELBY GT500 2.9L WHIPPLE SUPERCHARGER ASSEMBLY POLISHED FINISH -- M-6066-MSVT29PT 2007-2010 SHELBY GT500 725-750HP WHIPPLE SUPERCHARGER UPGRADE KIT -- M-6066-MSVT29C
List:$4,799.00
Introductory Special:$4,399.00
You save $400.00!
List:$6,295.00
Introductory Special:$5,995.00
You save $300.00!
2007-2010 SHELBY GT500 2.9L WHIPPLE SUPERCHARGER ASSEMBLY POLISHED FINISH -- M-6066-MSVT29PT 2007-2010 SHELBY GT500 725-750HP WHIPPLE SUPERCHARGER UPGRADE KIT -- M-6066-MSVT29C
  • Fits 5.4L DOHC 2007-2010 Shelby GT500
  • 2.9 Liter Twin-Screw supercharger with 3-inch pulley
  • Polished Finish
  • At comparable boost levels the unit delivers more power, cooler charge temps, and less parasitic loss than stock supercharger
  • Supercharger Only
  • Does not include open element cold air intake system
  • Uses OEM supercharger belt
  • Calibration Not Included (Recalibration of computer is mandatory to prevent engine damage)
  • Premium
    fuel required
  • Damper upgrade M-6312-SVT strongly recommended for 2007 SVT Mustangs to prevent crankshaft failure  
  • Black Wrinkle Finish For Polished Finish see M-6066-MSVT29PC
  • Fits 2007-2010 Shelby GT500
  • NOW AVAILABLE WITH AN OPTIONAL WARRANTY UP TO 5 YEARS 100,000 MILES
  • 2010 Shelby GT500: Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost
  • 2007-2009 Shelby GT500: Produces 725 hp @ 6100 rpm and 670 lb-ft @ 4700 rpm @ 17 psi boost
  • Kit includes:
    • 2.9L Whipple Twin Screw Supercharger Assembly with Whipple "Crusher" inlet
    • Whipple 123 mm MAF housing
    • Modified 2010-2011 OEM Shelby GT500 Cold Air Box with High Flow Washable Performance Air Filter
    • New intake tube
    • Ford Racing Cobra Jet 65 mm dual bore polished billet aluminum throttle body M-9926-CJ (A $679.95 Value)
    • High performance spark plug set
    • All of the necessary miscellaneous hardware, OEM stytle fittings, and connectors.
    • Ford Racing Exclusive upgraded dual fuel pump assembly.
    • Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel.
  • Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase
  • Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor
  • Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
  • Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal
2007-2010 SHELBY GT500 725-750HP WHIPPLE SUPERCHARGER UPGRADE KIT POLISHED FINISH -- M-6066-MSVT29PC
List:$6,595.00
Introductory Special:$6,295.00
You save $300.00!
2007-2010 SHELBY GT500 725-750HP WHIPPLE SUPERCHARGER UPGRADE KIT POLISHED FINISH -- M-6066-MSVT29PC
  • Polished Finish For Black Wrinkle Finish see M-6066-MSVT29C
  • Fits 2007-2010 Shelby GT500
  • NOW AVAILABLE WITH AN OPTIONAL WARRANTY UP TO 5 YEARS 100,000 MILES
  • 2010 Shelby GT500: Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost
  • 2007-2009 Shelby GT500: Produces 725HP @ 6100 rpm and 670 lb-ft @ 4700 rpm @ 17 psi boost
  • Kit includes:
    • 2.9L Whipple Twin Screw Supercharger Assembly with Whipple "Crusher" inlet
    • Whipple 123 mm MAF housing
    • Modified 2010-2011 OEM Shelby GT500 Cold Air Box with High Flow Washable Performance Air Filter
    • New intake tube
    • Ford Racing Cobra Jet 65 mm dual bore polished billet aluminum throttle body M-9926-CJ (A $679.95 Value)
    • High performance spark plug set
    • All of the necessary miscellaneous hardware, OEM stytle fittings, and connectors.
    • Ford Racing Exclusive upgraded dual fuel pump assembly.
    • Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel.
  • Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase
  • Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor
  • Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
  • Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal
   
 
Ford Racing Parts Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback