|
Ford Racing 10.5 inch 26 Spline Clutch Kit -- M-7550-T302
|
|
Ford Racing Heavy Duty 10.5" Clutch Kit -- M-7560-E302
|
|
Our Price: $159.00
|
|
|
|
Our Price: $269.00
|
|
|
|
|
Includes:
- Ford Racing 10.5 inch heavy duty 26 spline clutch disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. Not recommended for use with stock pressure plates. Please use M-7560-B302 Ford Racing Pressure Plate or equivalent for proper engagement.
This 10.5 inch clutch disc is required for use with applications using a 26 spline input shaft Tremec transmission.
Compatible with the following transmissions and flywheels:
- M-7003-R58C Tremec TKO 600 Transmission
- M-7003-R58H Tremec TKO 600 Transmission
- Production and Ford Racing 10.5" Flywheels
NOTES:
- Clutches have NO warranty!
- Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with Tremec 3650 transmission and 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel. Metric fasteners and dowel pins must be used with 10.5" clutches.
|
- Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions.
- Consists of clutch disc and pressure plate
- Heavy duty diaphragm type clutch assembly with 25 % more capacity than stock Mustang clutch.
- Clutch disc has 1.0625"-10 spline hub.
- OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur.
- Metric fasteners and dowel pins must be used with 10.5" clutches.
- Clutches have NO warranty!
- Also recommended Throwout Bearing M-7548-A, Pressure Plate Bolt and Dowel Kit M-6397-A302, Roller Pilot Bearing M-7600-A or M-7600-B.
|
|
|
|
Ford Racing 11inch 26 Spline Clutch Kit -- M-7560-T46
|
|
TREMEC 5-SPEED TKO 600 TRANSMISSION (CLOSE RATIO) -- M-7003-R58C
|
List Price:$479.00
Our Price: $369.00
You save $110.00!
|
|
|
List Price:$2,420.00
Our Price: $2,295.00
You save $125.00!
|
|
|
|
|
Kit Includes:
- Ford Racing 11 inch heavy duty 26 spline clutch disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side.
- Ford Racing heavy duty centrifugal assist design pressure plate with 25% more torque capacity then production Cobra.
This 11 inch clutch kit is required for use with applications using a 26 spline input shaft Tremec transmission and 4.6L flywheel.
Compatible with the following transmissions and flywheels:
- M-7003-R58C Tremec TKO 600 Transmission
- M-7003-R58H Tremec TKO 600 Transmission
- Production 4.6L 11" Flywheel
- M-6375-G46A Ford Racing 11" 8 bolt crank billet steel 164 tool neutral balance flywheel
- M-6375-F46A Ford Racing 11" 6 bolt crank billet steel 164 tool neutral balance flywheel
- M-6375-R00A Ford Racing 11" 8 bolt crank aluminum 164 tool neutral balance flywheel
- M-6375-R00B Ford Racing 11" 6 bolt crank aluminum 164 tool neutral balance flywheel
NOTES:
- Clutches have NO warranty!
- Requires the use of M-6397-A46 pressure plate bolt and dowel kit.
|
- 600 lbs./ft. torque capacity
- Gear ratios: 1st 2.87; 2nd 1.90; 3rd 1.34; 4th 1.00; 5th 0.82
- Features
improved shift forks, one-piece counter-shaft, gears made of 4615 steel
which increases the torque capacity over that of the M-7003-R58 model
- Input shaft is 26 spline; output shaft is 31 spline
- Requires bellhousing M-6392-R58 to install in a 1979-95 Mustang
- For 1979-93 Mustang applications, use M-5059-A crossmember (79-81 will require modification)
- For 1994-95 Mustang applications, modify vehicle crossmember, lengthen driveshaft .625'' and use clutch fork E6ZZ-7515-A
- 31 spline driveshaft yoke required, M-4841-A recommended
- Requires unique clutch disc M-7550-T302 (10.5") designed for use with 26 spline input
- Can be used in 4.6L applications with bellhousing M-6392-M46 and Clutch Kit M-7560-T46 (11")
|
|
|
|
TREMEC 5-SPEED TKO 600 TRANSMISSION -- M-7003-R58H
|
|
|
List Price:$2,420.00
Our Price: $2,295.00
You save $125.00!
|
|
|
|
|
- Close ratio 1st through 4th
- 600 lbs./ft. torque capacity
- Gear ratios: 1st 2.87; 2nd 1.90; 3rd 1.34; 4th 1.00; 5th 0.68
- Features
improved shift forks, one-piece counter-shaft, gears made of 4615 steel
which increases the torque capacity over that of the M-7003-R58 model
- Input shaft is 26 spline; output shaft is 31 spline
- Requires bellhousing M-6392-R58 to install in a 1979-95 Mustang
- For 1979-93 Mustang applications, use M-5059-A crossmember (79-81 will require modification)
- For 1994-95 Mustang applications, modify vehicle crossmember, lengthen driveshaft .625'' and use clutch fork E6ZZ-7515-A
- 31 spline driveshaft yoke required, M-4841-A recommended
- Requires unique clutch disc M-7550-T302 (10.5") designed for use with 26 spline input
- Can be used in 4.6L applications with bellhousing M-6392-M46 and Clutch Kit M-7560-T46 (11")
|
|
|
