ReadyLift Features

• Keeps your factory ride - Guaranteed
• Will never wear, break or fail - Guaranteed
• Toughest finish - Guaranteed
• Safest way to level lift - Guaranteed

Smartest Strut Extensions Available

• Safely installs
• Fixed Lift
• 10.9 rated mounting studs
• Powder coated - Solid steel construction

• Fits F150 SVT Raptor and 2009-2010 F150 Harley truck with twin-pipe exhaust
• Chromed stainless steel tips etched with Ford Racing Logo
• 3.5" outside diameter
• Angle cut design
• Easy to install clamp on design
• Includes clamps
• Same as Ford OEM part number: 7L3Z-5255-AB (Retails at Ford Dealer for $476.61)
• Note: Will not fit aftermarket exhaust systems.

• For Highway or Off Road use  
• Kit Includes:  
  • Multi-Tool Knife  
  • Leather Gloves  
  • Moving blanket  
  • Glow Sticks  
  • Jumper cables  
  • Reflective Vest  
  • LED flashlight  
  • Trash bags
  • SOL Survival Pack  
  • Tire pressure gauge  
  • (2) 1" rachet straps  
  • (2) Light sticks  
  • Triangle reflector  
  • See M-19515-TOW for Tow Kit  

• +12 Rear Wheel HP and +14TQ increase as measured on Airaid's in-ground chassis dyno.
• Fits Ford SVT Raptor 6.2L V8
  
• Cold Air Dam design with Roto-Molded Intake Tube to deliver maximum air flow to the engine.
• Retains the OEM coolant reservoir
• Strategic placement of the OEM Mass Air Flow sensor for optimum performance and reliability.
  
• Huge washable premium filter with a hand poured urethane body that won't crack, shrink, or curl like rubber or Plastisol
• Airaid's exclusive unique dry filtration technology enables the filter to filtrate far superior to the average cotton filter
• The last air filter you will need to buy!  Dry filter technology is easily cleaned with common household detergents and water.
  
• Proudly Made in the USA with a "No-Hassle" Warranty.

• Fits F150 Raptor  
• Black painted finish with machined lip  
• 6-lug 135mm bolt circle  
• 6.16" backspacing  
• 34mm offset  
• 17" X 8.5" wide  
• Includes Ford Racing center cap  
• Requires stem mounted sensor 9L3Z-1A189-A for Tire Pressure Monitoring System  

• Fits F150 Raptor  
• Charcoal Grey painted finish with machined lip  
• 6-lug 135mm bolt circle  
• 6.16" backspacing  
• 34mm offset  
• 17" X 8.5" wide  
• Includes Ford Racing center cap  
• Requires stem mounted sensor 9L3Z-1A189-A for Tire Pressure Monitoring System  

• Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
  
• Powder coated, Magnesium cam covers
• Includes fasteners, grommets, gaskets and camshaft position sensor grommets
• Color compliments Tuxedo Black body color

• Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
  
• Powder coated, Magnesium cam covers
• Includes fasteners, grommets, gaskets and camshaft position sensor grommets
• Color compliments Blue Flame body color

• Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
  
• Powder coated, Magnesium cam covers
• Includes fasteners, grommets, gaskets and camshaft position sensor grommets
• Color compliments Silver body color

• Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
  
• Powder coated, Magnesium cam covers
• Includes fasteners, grommets, gaskets and camshaft position sensor grommets
• Color compliments Oxford White body color

• Fits F150 SVT Raptor
• Made from 1-3/4" O.D.,  .120" wall steel tubing
• Comes with light tabs for mounting 4 six or eight inch diameter lights
• Easy installation, bolts up to existing factory holes, no drilling required
• Grey powder coated finish
• LIGHTS SOLD SEPARATELY
  
• For 8" Round Auxiliary Halogen Lights see M-15200-F15R8HAL
• For 6" Round Auxiliary Halogen Lights see M-15200-F15R6HAL
• For 8" Round Auxiliary High Intensity Discharge Lights see M-15200-F15RBHID
• FOR OFF-ROAD USE ONLY!

• +11 Rear Wheel HP and +15TQ increase as measured on Airaid's in-ground chassis dyno.
• Fits Ford SVT Raptor 5.4L V8
  
• Cold Air Dam design with Roto-Molded Intake Tube to deliver maximum air flow to the engine.
• Retains the OEM coolant reservoir
• Strategic placement of the OEM Mass Air Flow sensor for optimum performance and reliability.
  
• Huge washable premium filter with a hand poured urethane body that won't crack, shrink, or curl like rubber or Plastisol
• Airaid's exclusive unique dry filtration technology enables the filter to filtrate far superior to the average cotton filter
• The last air filter you will need to buy!  Dry filter technology is easily cleaned with common household detergents and water.
  
• Proudly Made in the USA with a "No-Hassle" Warranty.

• The Triple Dog GT is a downloader and monitor in one compact electronic device
• Full color screen
• Patent Pending Driving Coach directs you how to drive more efficiently
• Works on over eight different vehicle makes and over 50 different vehicle models
• Reads and erases diagnostic trouble codes
• Easy Installation: Installs in 20-40 minutes by plugging into the diagnostic port under the driver side dash and programming your truck's ECU.
• Free online updates
• 12/15/11: 2011-2012 F150 Eco Boost V6 Now Supported. Increase up to 42HP and 55TQ at the wheels.
• 12/15/11: 2011-2012 F150 5.0L/6.2L V8 Now Supported. Increase up to 17HP and 17TQ at the wheels.
• 12/15/11: 2011-2012 SVT Raptor Now Supported. Increase up to 22HP and 29TQ at the wheels.
• 12/15/11: 2011-2012 F250/F350 6.2L V8 Now Supported. Increase up to 19HP and 26TQ at the wheels.

• Black Powder Coated
• 100 Watt Halogen bulbs
• Matching Black ABS Stone Guards
• Four lights per kit
• Two Long Range and two Driving lights
• Wire harness kit and instructions included.
  
• LIGHT BAR PICTURED IS NOT INCLUDED AND IS SOLD SEPARATELY!! see M-15266-F15RBAR
• FOR OFF-ROAD USE ONLY!

• Three galvanized 3/4" SPA Shackles
• One Receiver Hitch Block
• One hitch pin
• One 3" x 35' Recovery Strap. Loops feature a double reinforced wear pad. Break strength 21,000 lbs. Web tensile strength 27,000 lbs.
• One pair leather gloves
• One NATO approved folding spade. Fully extended for normal digging or used at 90 degrees for use as a pick. Made of aluminum glass filled ABS and Boron steel.
• One multi pocket gear bag

• Fits F-150 SVT Raptor
• Replaces production front skid plate
• Added side and center reinforcements
• Complete with mounting brackets and hardware
• Powder-coated "foundry finish" gray
• "Ford Racing" logo, right and left sides

• Fits 6.2L F150 and SuperDuty trucks, including SVT Raptor model equipped with 6.2L engine
  
• Powder coated, Magnesium cam covers
• Includes fasteners, grommets, gaskets and camshaft position sensor grommets
• Color compliments Molten Orange body color

• Black Powder Coated
• 100 Watt Halogen bulbs
• Matching Black ABS Stone Guards
• Four lights per kit
• Two Long Range and two Driving lights
• Wire harness kit and instructions included
  
• LIGHT BAR PICTURED IS NOT INCLUDED AND IS SOLD SEPARATELY!! see M-15266-F15RBAR
• FOR OFF-ROAD USE ONLY!

• Ford SVT Raptor 6.2L V8 Extended Cab with 67" Bed
• Ford SVT Raptor 6.2L V8 Crew Cab with 67" Bed
  

• Allows you to carry a spare tire while maintaining ground clearance
• Easy to open with two quick release pins
  
• Designed for inboard mounting of up to a 40" spare tire
  
• No cutting, welding or drilling required
  
• Mandrel-bent, MIG welded tubular construction
  
• Powder coated with black polyester semi-gloss and is equipped with zinc plated hardware for long lasting performance in extreme conditions.
  
• NOTE:Backup camera will not function with installation of tiregate