|
FORD RACING SHELBY GT500 SUPERCHARGER UPGRADE KIT
|
|
FORD RACING SHELBY GT500 SUPERCHARGER UPGRADE KIT
|
List: $5,600.00
Sale Price: $4,799.99
You save $800.01!
|
|
|
List: $5,600.00
Sale Price: $4,799.99
You save $800.01!
|
|
|
|
|
|
- Fits 5.4L DOHC 2007-2009 Shelby GT500
- 105 hp increase over stock (605 hp vs. 500 hp), 70 lbs/ft increase in torque
over stock (554 lbs/ft vs. 480 lbs/ft) using correction factor SAE
J1349
- 2.3L Twin Vortices Series Eaton supercharger features 4-lobe 160 degree
twist rotors
- Includes open element cold air intake system
- Includes Ford Racing Pro-Cal Tuning. All tuning is pre-set. Turn key setup.
|
- Fits 2010 Shelby GT500
- Includes 2.3L TVS Twin Vortices Eaton Supercharger with 4-lobe 160 degree twist rotors.
- Includes Air Inlet Resonator Eliminator M-9B659-MSVT for improved air flow and strut tower brace clearance
- Ford Racing ProCal tool with performance calibration for
significantly improved throttle response and performance feel (A $400
value)
- Premium fuel required
- Available as part of the Shelby Super
Snake Package
- 50 State Legal E.O. #D-418-10
- 660 hp @ 6,100 rpm
- 669 lbs-ft @ 4,700 rpm
|
|
|
|
Whipple Mustang GT W140ax NON-Intercooled 400HP Supercharger Kit
|
|
Whipple Mustang GT W140ax Intercooled HO 550HP (475HP with Automatic) Supercharger Kit
|
List Price: $5,979.00
Starting From: $5,385.00
You save $594.00!
|
|
|
List Price: $7,269.00
Starting From: $6,795.00
You save $474.00!
|
|
|
|
|
Special Value: Ford Racing Pro-Cal II Handheld Tuner is Included at NO EXTRA CHARGE ($300 Value).
- This minimizes vehicle downtime (No more shipping PCM's to be reflashed).
- Allows you to choose calibrations by fuel octane level (91 or 93) and to enter in aftermarket gear ratio and tire size changes to correct your speedometer.
- Tuning is Pre-Set. Simple Plug-n-Play Installation.
- Built-In Code Reader: Read and Erase diagnostic codes
- Plus, the original stock settings are saved and can be restored at any time.
- Fits 2005-2010 Mustang GT with Manual or Automatic Transmission
- Produces 405 Rear Wheel HP and 400 Ft-lbs. with 93 octane gas at approximately 6-psi of boost
- Kit includes intake manifold supercharger. drive belt, and all other accessories for installation of the supercharger
- Kit includes Ford Racing zero degree spark plugs and OEM Ford GT
38 lb/hr fuel injectors. Best value on the market. A real OEM quality
system using real OEM quality parts.
- Includes Pro-Cal tool voucher for superior engine tuning, power, and driveability.
- Premium fuel required. Calibrations available for 91 octane or
93 octane (customer specifies octane level during Pro-Cal tool
registration).
- Calibrations available for aftermarket rear end gear ratios and
tire sizes (customer specifies tire size and gear ratio during Pro-Cal
tool registration).
- Due to multiple calibrations, online registration is required to receive the Pro-Cal tool after purchase
- 50 State Smog Legal (E.O. #D-231-24)
- Engine calibrations are developed and supported for US and
Canadian vehicles only. Other international calibrations are not
supported.
- Note: Superchargers are built to order. Please allow 7 days for assembly.
- Ford Racing Powertrain and Drivetrain Warranty included.
- Price includes Free Truck Freight to your door with residential liftgate service included (a $400 value)
|
Special Value: Ford Racing Pro-Cal II Handheld Tuner is Included at NO EXTRA CHARGE ($300 Value).
- This minimizes vehicle downtime (No more shipping PCM's to be reflashed).
- Allows
you to choose calibrations by fuel octane level (91 or 93) and to enter
in aftermarket gear ratio and tire size changes to correct your
speedometer.
- Tuning is Pre-Set. Simple Plug-n-Play Installation.
- Built-In Code Reader: Read and Erase diagnostic codes
- Plus, the original stock settings are saved and can be restored at any time.
- Fits 2005-2010 Mustang GT Manual and Automatic Transmissions
- Produces 550+HP and 542 FT-LBS. with 93 octane gas at approximately 11 psi of boost (Manual Transmission)
- Produces 475+HP and 442 FT-LBS. with 93 octane gas at approximately 8 psi of boost (Automatic Transmission)
- Kit includes intake manifold supercharger. drive belt,
intercooler, heat exchanger and all other accessories for installation
of the supercharger
- Kit includes OEM '03-'04 SVT Cobra intercooler reservior, Ford
Racing zero degree spark plugs, OEM Ford GT 38 lb/hr fuel injectors,
OEM Ford Shelby GT500 dual fuel pump system, and OEM Ford Lightning
Bosch electric intercooler water pump. Best value on the market. A real
OEM quality system using real OEM quality parts.
- Includes Pro-Cal tool voucher for superior engine tuning, power, and driveability.
- Premium fuel required. Calibrations available for 91 octane or 93 octane.
- Calibrations available for different rear end gear ratios and tire sizes.
- Due to multiple calibrations, online registration is required to receive the Pro-Cal tool after purchase
- 50 State Smog Legal (E.O. #D-231-24)
- Engine calibrations are developed and supported for US and
Canadian market vehicles only. Other international market export
calibrations are not supported.
- Price includes Free Truck Freight to your door with residential liftgate service included (a $400 value)
|
|
|
|
FORD RACING 2003-04 MUSTANG COBRA UPGRADED POLISHED SUPERCHARGER KIT (polished)
|
|
FORD RACING 2003-2004 MUSTANG COBRA UPGRADED POLISHED SUPERCHARGER KIT (Black Wrinkle)
|
|
|
|
|
|
• DESIGNED FOR USE WITH FACTORY TWIN BORE THROTTLE BODY!!!
• Kit includes polished supercharger and supercharger inlet, manifold
adapter plate and hardware kit
• Does not require PCM, fuel pump or MAF meter upgrades
• Simple bolt on increase at the rear wheels of 85 horsepower and
50 ft./lbs. of torque
• Installation of this kit will void your new vehicle engine warranty
• Designed by Ford Racing and Whipple engineers
|
• DESIGNED FOR USE WITH FACTORY TWIN BORE THROTTLE BODY!!!
• Kit includes polished supercharger and supercharger inlet, manifold
adapter plate and hardware kit
• Does not require PCM, fuel pump or MAF meter upgrades
• Simple bolt on increase at the rear wheels of 85 horsepower and
50 ft./lbs. of torque
• Installation of this kit will void your new vehicle engine warranty
• Designed by Ford Racing and Whipple engineers
|
|
|
|
FORD RACING 2003-04 MUSTANG COBRA UPGRADED POLISHED SUPERCHARGER KIT WITH AFTERMARKET THROTTLEBODY (Black Wrinkle)
|
|
FORD RACING 2003-04 MUSTANG COBRA UPGRADED POLISHED SUPERCHARGER KIT WITH AFTERMARKET THROTTLEBODY(polished)
|
|
|
|
|
|
• Designed for use with most aftermarket single blade
oval bore throttle bodies
– For applications using factory twin bore throttle body,
use M-6066-CT46P
• Kit includes supercharger, supercharger inlet, manifold adapter
plate and hardware kit
• Requires PCM, fuel pump and MAF meter upgrades
• Installation of this kit will void your new vehicle engine warranty
• Designed by Ford Racing and Whipple engineers
|
• Designed for use with most aftermarket single blade
oval bore throttle bodies
– For applications using factory twin bore throttle body,
use M-6066-CT46P
• Kit includes supercharger, supercharger inlet, manifold adapter
plate and hardware kit
• Requires PCM, fuel pump and MAF meter upgrades
• Installation of this kit will void your new vehicle engine warranty
• Designed by Ford Racing and Whipple engineers
|
|
|
|
2007-2010 SHELBY GT500 725-750HP WHIPPLE SUPERCHARGER UPGRADE KIT -- M-6066-MSVT29C
|
|
2007-2010 SHELBY GT500 725-750HP WHIPPLE SUPERCHARGER UPGRADE KIT POLISHED FINISH -- M-6066-MSVT29PC
|
List:
Sale Price: $5,895.00
You save $400.00!
|
|
|
List:
Sale Price: $6,195.00
You save $400.00!
|
|
|
|
|
- Black Wrinkle Finish For Polished Finish see M-6066-MSVT29PC
- Fits 2007-2010 Shelby GT500
- 2010 Shelby GT500: Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost
- 2007-2009 Shelby GT500: Produces 725 hp @ 6100 rpm and 670 lb-ft @ 4700 rpm @ 17 psi boost
- Kit includes:
- 2.9L Whipple Twin Screw Supercharger Assembly with Whipple "Crusher" inlet
- Whipple 123 mm MAF housing and zip tube
- Ford Racing Cobra Jet 65 mm dual bore throttle body M-9926-CJ (A $679.95 Value)
- Ford Racing Exclusive upgraded dual fuel pump assembly.
- Necessary to reliably supply the added fuel for this power output.
- Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel.
- Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase
- Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor
- Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
- Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal
|
- Polished Finish For Black Wrinkle Finish see M-6066-MSVT29C
- Fits 2007-2010 Shelby GT500
- 2010 Shelby GT500: Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost
- 2007-2009 Shelby GT500: Produces 725HP @ 6100 rpm and 670 lb-ft @ 4700 rpm @ 17 psi boost
- Kit includes:
- 2.9L Whipple Twin Screw Supercharger Assembly with Whipple "Crusher" inlet
- Whipple 123 mm MAF housing and zip tube
- Ford Racing Cobra Jet 65 mm dual bore throttle body M-9926-CJ (A $679.95 Value)
- Ford Racing Exclusive upgraded dual fuel pump assembly.
- Necessary to reliably supply the added fuel for this power output.
- Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel.
- Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase
- Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor
- Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
- Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal
|
|
|
|
2007-2010 SHELBY GT500 2.9L WHIPPLE SUPERCHARGER ASSEMBLY POLISHED FINISH -- M-6066-MSVT29PT
|
|
2007-2010 SHELBY GT500 2.9L WHIPPLE SUPERCHARGER ASSEMBLY BLACK WRINKLE FINISH -- M-6066-MSVT29T
|
List:
Sale Price: $4,399.00
You save $400.00!
|
|
|
List:
Sale Price: $3,999.00
You save $400.00!
|
|
|
|
|
|
- Fits 5.4L DOHC 2007-2010 Shelby GT500
- 2.9 Liter Twin-Screw supercharger with 3-inch pulley
- Polished Finish
- At comparable boost levels the unit delivers more power, cooler charge temps, and less parasitic loss than stock supercharger
- Supercharger Only
- Does not include open element cold air intake system
- Uses OEM supercharger belt
- Calibration Not Included (Recalibration of computer is mandatory to prevent engine damage)
- Premium
fuel required
- Damper upgrade M-6312-SVT strongly recommended for 2007 SVT Mustangs to prevent crankshaft failure
|
- Fits 5.4L DOHC 2007-2010 Shelby GT500
- 2.9 Liter Twin-Screw supercharger with 3-inch pulley
- Black Wrinkle Finish
- At comparable boost levels the unit delivers more power, cooler charge temps, and less parasitic loss than stock supercharger
- Supercharger Only
- Does not include open element cold air intake system
- Uses OEM supercharger belt
- Calibration Not Included (Recalibration of computer is mandatory to prevent engine damage)
- Premium
fuel required
- Damper upgrade M-6312-SVT strongly recommended for 2007 SVT Mustangs to prevent crankshaft failure
|
|
|
|
2007-2010 SHELBY GT500 TVS SUPERCHARGER ASSEMBLY WITH 72MM PULLEY -- M-6066-MSVTT72
|
|
2007-2011 SHELBY GT500 TVS SUPERCHARGER ASSEMBLY -- M-6066-TVS
|
List:
Sale Price: $4,195.00
You save $500.00!
|
|
|
List:
Sale Price: $4,095.00
You save $500.00!
|
|
|
|
|
- Black Wrinkle Finish
- Fits 5.4L DOHC 2007-2010 Shelby GT500
- 2.3L Twin Vortices Series supercharger features 4-lobe 160 degree twist rotors
- 72MM Pulley
- Supercharger only!
- Does not include open element cold air intake system
- Calibration NOT included!
- Recalibration of engine management system is mandatory to prevent engine damage
- Premium fuel required
- Damper upgrade M-6312-SVT strongly recommended for 2007 SVT Mustangs to prevent crankshaft failure
|
- Black Wrinkle Finish
- Fits 5.4L DOHC 2007-2011 Shelby GT500
- 2.3L Twin Vortices Series supercharger features 4-lobe 160 degree twist rotors
- Supercharger only!
- Does not include open element cold air intake system
- Calibration NOT included!
- Recalibration of engine management system is mandatory to prevent engine damage
- Premium fuel required
- Damper upgrade M-6312-SVT strongly recommended for 2007 SVT Mustangs to prevent crankshaft failure
|
|
|
|
FORD RACING/WHIPPLE 624HP 9 psi 2011 MUSTANG GT SUPERCHARGER KIT (Black Wrinkle) -- M-6066-MGT624D
|
|
2011 SHELBY GT500 750HP WHIPPLE SUPERCHARGER UPGRADE KIT -- M-6066-MSVT29D
|
List Price: $7,499.00
Sale Price: $6,999.00
You save $500.00!
|
|
|
List:
Sale Price: $5,895.00
You save $400.00!
|
|
|
|
|
- Fits 2011 Mustang GT (Manual Transmission Only)
- Produces 624 SAE HP @ 6900 RPM and 536 SAE lb-ft. @ 4700 RPM with 91/93 octane gas at approximately 9 psi of boost
- Kit includes:
- Revolutionary W140ax Gen 2 Whipple 2.3L Twin-Screw Supercharger Assembly
- High Flow Intake Manifold
- Large Shelby GT500 Twin 60mm OEM Throttle Body
- Dedicated FEAD 6 Rib Drive Belt System with unique belt tensioner. No more long belts that slip.
This belt system drives the supercharger and A/C only. The alternator
and water pump is driven by a separate belt. Power steering is electric
and does not have a pulley.
- Calibrated to reliably use the Stock Fuel Pump. Dramatically reduces install time compared to other kits at this power level.
- Complete Air to Liquid Intercooler
- Massive Bar-Plate Aluminum Intercooler for Superior Cooling
- 47 lb/hr high impedance fuel injectors (M-9593-LU47)
- Exclusive High Flow Air Box System
- No Dyno Tuning Required, Included Pro Cal Tool comes with everything pre-set in the calibration.
- Ford
Racing Pro-Cal flash programmer designed by OEM Ford Calibration
Engineers for industry leading power, reliability, and durability.
Vehicle tuning was tested using OEM standards and testing including
engine dyno durability tests, testing on Ford's Arizona Proving Grounds
for hot climate testing, testing in cold climates, and high altitude
testing. Many miles were logged and analyzed to make sure that tuning
was safe and effective. Don't just make "dyno queen" power. Ford Racing
makes sure that you have real world street driveability and real world
power in all driving conditions.
- Premium fuel required. Calibrations available for 91 or 93 octane fuel.
- Pro Cal Tool is adjustable for different tire size and gear ratio changes
- Due to multiple calibrations, online registration is required to receive the Pro-Cal tool after purchase
- 50 State Smog Legal (E.O. #D-231-24)
- Engine
calibrations are developed and supported for US and Canadian market
vehicles only. Other international market export calibrations are not
supported.
- Note: Superchargers are built to order. Please allow 7 days for assembly.
|
- Black Wrinkle Finish For Polished Finish see M-6066-MSVT29PD
- Fits 2011 Shelby GT500
- Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost
- Kit includes:
- 2.9L Whipple Twin Screw Supercharger Assembly with Whipple "Crusher" inlet
- Whipple 123 mm MAF housing and zip tube
- Ford Racing Cobra Jet 65 mm dual bore throttle body M-9926-CJ (A $679.95 Value)
- Ford Racing Exclusive upgraded dual fuel pump assembly.
- Necessary to reliably supply the added fuel for this power output.
- Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel.
- Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase
- Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor
- Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
- Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal
|
|
|
|
2011 SHELBY GT500 750HP WHIPPLE SUPERCHARGER UPGRADE KIT (POLISHED FINISH) -- M-6066-MSVT29PD
|
|
FORD RACING/WHIPPLE 624HP 9 psi 2011 MUSTANG GT SUPERCHARGER KIT (Polished Finish) -- M-6066-MGT624PD
|
List Price: $6,595.00
List:
Sale Price: $6,095.00
You save $500.00!
|
|
|
List Price: $8,099.00
Sale Price: $7,499.00
You save $600.00!
|
|
|
|
|
|
- Polished Finish For Black Wrinkle Finish see M-6066-MSVT29D
- Fits 2011 Shelby GT500
- Produces 750 hp @ 6100 rpm and 719 lb-ft @ 4200 rpm @ 17 psi boost
- Kit includes:
- 2.9L Whipple Twin Screw Supercharger Assembly with Whipple "Crusher" inlet
- Whipple 123 mm MAF housing and zip tube
- Ford Racing Cobra Jet 65 mm dual bore throttle body M-9926-CJ (A $679.95 Value)
- Ford Racing Exclusive upgraded dual fuel pump assembly.
- Necessary to reliably supply the added fuel for this power output.
- Ford Racing ProCal tool with performance calibration for significantly improved throttle response and performance feel.
- Due to multiple powertrain calibrations, online registration is required to receive ProCal calibration delivery tool after purchase
- Ford Racing does not ship ProCal tools directly overseas. Customers must make special arrangements with their Ford Racing Distributor
- Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only
- Unlike our competitors, all Ford Racing Power Upgrade Packages are 50 state emissions legal
|
- Fits 2011 Mustang GT (Manual Transmission Only)
- Produces 624 SAE HP @ 6900 RPM and 536 SAE lb-ft. @ 4700 RPM with 91/93 octane gas at approximately 9 psi of boost
- Kit includes:
- Revolutionary W140ax Gen 2 Whipple 2.3L Twin-Screw Supercharger Assembly
- High Flow Intake Manifold
- Large Shelby GT500 Twin 60mm OEM Throttle Body
- Dedicated FEAD 6 Rib Drive Belt System with unique belt tensioner. No more long belts that slip.
This belt system drives the supercharger and A/C only. The alternator
and water pump is driven by a separate belt. Power steering is electric
and does not have a pulley.
- Calibrated to reliably use the Stock Fuel Pump. Dramatically reduces install time compared to other kits at this power level.
- Complete Air to Liquid Intercooler
- Massive Bar-Plate Aluminum Intercooler for Superior Cooling
- 47 lb/hr high impedance fuel injectors (M-9593-LU47)
- Exclusive High Flow Air Box System
- No Dyno Tuning Required, Included Pro Cal Tool comes with everything pre-set in the calibration.
- Ford
Racing Pro-Cal flash programmer designed by OEM Ford Calibration
Engineers for industry leading power, reliability, and durability.
Vehicle tuning was tested using OEM standards and testing including
engine dyno durability tests, testing on Ford's Arizona Proving Grounds
for hot climate testing, testing in cold climates, and high altitude
testing. Many miles were logged and analyzed to make sure that tuning
was safe and effective. Don't just make "dyno queen" power. Ford Racing
makes sure that you have real world street driveability and real world
power in all driving conditions.
- Premium fuel required. Calibrations available for 91 or 93 octane fuel.
- Pro Cal Tool is adjustable for different tire size and gear ratio changes
- Due to multiple calibrations, online registration is required to receive the Pro-Cal tool after purchase
- 50 State Smog Legal (E.O. #D-231-24)
- Engine
calibrations are developed and supported for US and Canadian market
vehicles only. Other international market export calibrations are not
supported.
- Note: Superchargers are built to order. Please allow 7 days for assembly.
|
|
|
