 |
M-6007-XEFMS* E303 Camshaft - Automatic or Manual Transmission
302 cubic inch
340 hp @ 5500 RPM
9.0:1 compression ratio (nominal)
Neutral balance rotating assembly
Forged steel sportsman crankshaft
Billet steel SFI approved flywheel M-6375-D302 and SFI approved harmonic damper
Forged pistons
Forged steel sportsman connecting rods
Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake and exhaust
Double roller timing chain set M-6268-A302
Rear sump pan fits most Fox body cars
Ford Racing aluminum GT-40 cylinder heads M-6049-X306 with 1.94" intake valves and 1.54" exhaust valves
Roller rocker arms M-6564-B351
New block, oil and water pumps, oil pan
Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
Depending on your application, a crank pulley spacer, or a different timing cover, water pump, performance oil pan and pickup may be required.
Some or all of the following items may need to be changed from your original engine or modified for proper installation:
This engine has a rear sump oil pan and pickup, timing cover and reverse rotation water pump and EFI valve covers
A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information
The timing chain cover will work with most standard rotation water pumps.
Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump
A reverse rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers.
The valve covers M-6582-K302R should fit most 1986-93 Mustang EFI applications, optional valve covers (sold separately) are available.
The damper assembly M-6316-D302 (neutral balance) may require a spacer for pulley alignment.
The flywheel included M-6375-D302 should work for most 157-tooth manual transmission applications. For other transmission applications use the proper neutral balance flywheel.
Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order)
Built with current available parts. Photo and specs may vary
Shipping weight approximately 425 lbs
|
|
|
