FORD RACING 5.0L /BOSS 302-347 CID SMALL BLOCK 450 HP "Z" HEAD FRONT SUMP PERFORMANCE CRATE ENGINE ASSEMBLY -- M-6007-Z347FT

347 cubic inch
450 hp @ 6000 rpm(with headers, and a 650 CFM Holley carburetor not included)
400 lb.-ft. @ 4900 rpm
9.7:1 Compression ratio (nominal)
Forged pistons
Forged steel cap screw connecting rods
Forged steel crankshaft
Hydraulic roller camshaft, .580" lift intake .602" exhaust, duration at .050" is 232 degrees intake and 240 degrees exhaust with 1.6 rocker arms
Double roller timing chain set M-6268-A302
NEW "BOSS" 4-bolt main block, M-6010-BOSS302
High Performance Front sump pan fits most kit cars
Billet Steel Flywheel
MSD billet distributor
Ford Racing aluminum "Z" cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves
See our NEW "Z" Headers designed for an easy install in a Fox body M-9430-ZM7993 or ceramic coated, M-9430-ZM7993C
Roller rocker arms M-6564-F351
Single plane "Victor Jr." intake manifold M-9424-D302
Brand New heavy-duty block, oil and water pumps, performance oil pan, and high-performance harmonic balancer
Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes

INSTALLATION NOTES:
Some or all of the following items may need to be changed from your original engine
or modified for proper installation:

This engine has a front sump performance oil pan and pickup, regular rotation timing cover and regular rotation water pump, and non-EFI valve covers.
A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information.
The timing chain cover will work with most regular rotation water pumps.
Fuel pump eccentric M-6287-B302 is installed, allows use of mechanical fuel pump
A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers.
The valve covers (M-6582-BOSS) should fit most non-EFI applications, optional valve covers (sold separately) are available.
The damper M-6316-C351 may require a spacer for pulley alignment.
The Billet Steel flywheel (M-6375-A302B) included should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 28 oz. flywheel or flexplate.
Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order).
Built with current available parts. Photo and specs may vary.
Shipping weight approximately 465 lbs.