Acceptance Mark

Official PayPal Seal



(Your shopping cart is empty)
You are here: Home > 2013-2014 Shelby GT500 Parts
Sort By
Page of 3
FORD RACING WINDSHIELD BANNER -- M-1820-M 2010-2013 Shelby GT 500 Air Inlet Resonator Kit -- M-9B659-MSVT
Our Price:$40.00
Sale Price:$83.95

(6)
FORD RACING WINDSHIELD BANNER -- M-1820-M 2010-2013 Shelby GT 500 Resonator Delete Kit -- M-9B659-MSVT
  • Windshield banner designed to fit a 2005-2013 Mustang
  • Die cut white lettering that will easily attach to a properly prepared windshield
  • 50 inch long banner with 2 inch tall FORD RACING block lettering
  • Fits 2010-2013 Shelby GT500
  • Air Inlet Resonator Delete for improved air flow
  • Replaces the intake tube located between the stock air box assembly and the throttle body.
  • Includes couplers and clamps.
  • Increases supercharger whine for a performance sound.
  • Standard on 2010 Mustang SVT 660 Hp Supercharger Upgrade Kit M-6066-MSVTA
  • Great bolt-on part.  Cheap and easy HP upgrade.  Located after the MAF sensor, no custom tuning required.
2010-2013 SHELBY GT500 HIGH FLOW WASHABLE DRY REPLACEMENT CONE FILTER -- 861-399 4.6L/5.4L/5.8L HIGH VOLUME OIL PUMP W/ PICK UP -- M-6600-F46
Sale Price:$91.22

(2)
Our Price:$133.00
2010-2013 SHELBY GT500 HIGH FLOW WASHABLE DRY REPLACEMENT CONE FILTER -- 861-399 4.6L/5.4L/5.8L HIGH VOLUME OIL PUMP W/ PICK UP -- M-6600-F46
Airaid is proud to release a new OEM direct replacement filter for the 2010-2013 5.4L/5.8L Mustang Shelby GT500. Don't settle for a Universal fit cone filter, when the Airaid has been fully engineered and designed to the OEM specification. The Airaid premium filter offers an excellent combination of airflow and filtration and is fully serviceable making it the last air filter you will need to buy!  Don't spend your hard earned money on over-priced disposable filters from the dealer.  This filter is fully serviceable and comes with a "No-Hassle" lifetime warranty against any defects. 
  • Hand Poured Urethane Body Won't crack, shrink, or curl like rubber or Plastisol
  • Airaid's exclusive unique dry filtration technology enables the filter to filtrate far superior to the average cotton filter
  • The last air filter you will need to buy!  Dry filter technology is easily cleaned with common household detergents and water.
  • 6.76 Rear Wheel HP increase as measured on Airaid's in-ground chassis dyno.
  • Proudly Made in the USA with a "No-Hassle" Warranty.
  • Fits: 2005-2010 4.6L 3V Mustang 2007-2012 5.4L 4V Shelby GT500, 2013-2014 5.8L 4V Shelby GT500
  • Stock replacement for 2013-2014 5.8L 4V Shelby GT500
  • Pump has a thick steel backing plate to reduce pump housing flex which can lead to aeration in high performance use in modified engines or higher than factory RPM
  • Includes a steel backing plate that:
    • reduces internal leakage
    • reduces cavitation erosion
  • Includes pick-up tube
2005-2014 MUSTANG REAR LOWER CONTROL ARM UPGRADE KIT-- M-5538-A 2007-2014 MUSTANG SHELBY GT500 THROTTLE BODY -- M-9926-MSVT
Our Price:$149.95
Our Price:$149.95
2005-2014 MUSTANG REAR LOWER CONTROL ARM UPGRADE KIT -- M-5538-A 2007-2014 MUSTANG SHELBY GT500 THROTTLE BODY -- M-9926-MSVT
  • Fits 2005-2011 Mustang GT, 2005-2014 Mustang GT with auto transmission, and 2005-2014 Mustang V6
  • Standard equipment on 2007-2014 Shelby GT500, 2013-2014 Mustang GT with Track Pack, and 2011-2014 Mustang GT with manual transmission
  • Increased bushing durometer and stiffness for high performance applications
  • For race applications see tubular control arm kits M-5649-S or M-5649-R1

NOTE:some factory fasteners are one time use. Please reference service manual for reuse information and correct torque specifications.

  • Fits 2007-2014 Mustang Shelby GT500 
  • New stock replacement 60mm throttle body
5.8L 4V S/C HEAD CHANGING KIT -- M-6067-M58 FORD RACING 8.8 INCH ALUMINUM REAR AXLE COVER WITH DIFFERENTIAL COOLER PICKUP AND RETURN PORTS-- M-4033-KA
Our Price:$175.00
Our Price:$189.00
5.8L 4V S/C HEAD CHANGING KIT -- M-6067-M58 FORD RACING 8.8 INCH ALUMINUM REAR AXLE COVER WITH DIFFERENTIAL COOLER PICKUP AND RETURN PORTS-- M-4033-KA
  • Fits 2013 Mustang Shelby GT500 5.8L 4V engine
  • Kit includes multi-layer steel head gasket and torque to yield head bolts
  • Improved sealing for high cylinder pressure applications
  • Fits all 8.8 Inch Ford Straight Axle Rear Ends (1986-2013). Will not fit Independent Rear Suspension differential
  • Does clear the panhard bar on all 2005+ Mustangs.
  • Original equipment on 2013 Mustang Shelby GT500 with Track Pack option
  • Recommended for road racing or extended high speed/high temperature applications to reduce gear oil break down, increase gear and bearing life.
  • Cooling fins help reduce gear oil temperature
  • Cover is machined for differential cooler pickup and return fittings. 1/2 -14 NPSF dryseal straight pipe threads. 
  • Pipe plugs installed, must be removed to install  differential cooler fittings    
  • Includes 10 hex-head bolts with anaerobic yellow thread locking compound.
  • Includes 7/16-20 UNF vent plug when used in applications with alternative vent provisions.
  • Cover machined for oil temperature sensor with M10 X 1.6-6h threads
Mustang FR500C Rear Lower Control Arms -- M-5649-R1 Ford Racing Mustang Axle Girdle -- M-4033-G2
Our Price:$209.95
Our Price:$219.00

(2)
Mustang FR500C Rear Lower Control Arms -- M-5649-R1 Ford Racing Mustang Axle Girdle -- M-4033-G2
  • Fits 2005-2014 Mustang
  • Service replacement for the Mustang FR500C race car
  • Higher durometer bushing enhances response of vehicle
  • Great for use with rear control arm relocation kit M-5650-A
  • Low profile design to fit the 2005-2013 Mustang GT, 2007-2013 Shelby GT500, 2012-2013 BOSS 302
  • Designed to clear the panhard rod on 2005+ S197 Mustangs and Shelby GT500
  • Also fits 1986-2004 Mustang GT.  Will not fit IRS Cobras
  • Lightweight 356 T6 aluminum casting replaces rear cover on 8.8" rear axle
  • Load bolts provide additional support for differential bearing caps
  • Increase ring and pinion gear life
  • Does not fit the 2013 Shelby GT500 Track Pack Option
FORD RACING SHELBY GT500 1.25 INCH LOWERING SPRINGS -- M-5300-L FORD RACING MUSTANG BOSS 302S FRONT WHEEL BLACK WITH MACHINED FACE -- M-1007-DC199LGB
Our Price:$249.95

(3)
Local Ford Dealer's Price:$888.78
Introductory Special:$249.95
You save $638.83!

(1)
FORD RACING SHELBY GT500 1.25 INCH LOWERING SPRINGS -- M-5300-L FORD RACING MUSTANG BOSS 302S FRONT WHEEL BLACK WITH MACHINED FACE -- M-1007-DC199LGB
  • Fits 2007-2014 Shelby GT500
  • Lowers 2007-2012 coupe cars approximately 1.25"
  • Lowers 2013-2014 coupe cars approximately .400" front and 1.00" rear
  • Developed and validated for use with the Bilstein electronically controlled Track Pack option on the 2013-2014 GT500.  For non-track pack equipped 2013-2014 GT500 it is recommended to use these springs with the M-18000-C Ford Racing adjustable damper kit and M-5490-B ant-roll bar kit.
  • Engineered specifically for improved handling on 2007-2014 Shelby GT500 coupe
  • Recommended for use with M-18000-C damper kit and M-5490-B anti-roll bar kit.  The anti-roll bar kit is still being validated for the 2013 model year.
  • M-18183-C Strut Mounts are recommended for 2007-2011 cars
  • Gives a more aggressive looking stance well as increased handling dynamics
  • May cause slightly harsher ride compared to stock springs
    NOTE: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
  • 2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
  • Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
  • 19" x 9" wide
  • 5-lug, 4.5" bolt circle
  • 42 mm offset
  • 6.7" backspacing
  • Machined face with gloss black accents
  • Clear coated to OEM standards
  • Includes Ford Racing center cap M-1096-FR1
  • Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
  • Valve stem TPMS compatible
FORD RACING MUSTANG BOSS 302S REAR WHEEL BLACK WITH MACHINED FACE -- M-1007-DC1910LGB 2005-2014 MUSTANG HIGH PERFORMANCE CLUTCH FLUID LINE UPGRADE -- M-7512-A
Local Ford Dealer's Price:$841.62
Introductory Special:$249.95
You save $591.67!
Our Price:$259.95
FORD RACING MUSTANG BOSS 302S REAR WHEEL BLACK WITH MACHINED FACE -- M-1007-DC1910LGB 2005-2014 MUSTANG HIGH PERFORMANCE CLUTCH FLUID LINE UPGRADE -- M-7512-A
  • 2005 - 2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
  • Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
  • 19" x 10" wide
  • 5-lug, 4.5" bolt circle
  • 47.5 mm offset
  • 7.4" backspacing
  • Machined face with gloss black accents
  • Clear coated to OEM standards
  • Includes Ford Racing center cap M-1096-FR1
  • Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
  • Valve stem TPMS compatible
  • Service replacement for the following Mustang race cars: FR500CJ, FR500C, FR500S, BOSS 302R and BOSS 302S
  • Fits 2005-2014 Mustang V-6, GT, Boss, and Shelby GT500 Mustang with manual transmission
  • Upgraded clutch fluid line for high temperature, high performance applications
  • Replaces factory plastic line
  • Stainless steel hard line with braided stainless steel flex hose reduces line expansion
  • Includes Viton No. 10 o-rings
5.4L/5.8L 4V MODULAR HIGH CAPACITY OIL PAN -- M-6675-MSVT FORD RACING 2005-2014 SPARCO STEERING WHEEL OFF-ROAD -- M-3600-R
Our Price:$299.00
Our Price:$299.00
5.4L/5.8L 4V MODULAR HIGH CAPACITY OIL PAN -- M-6675-MSVT FORD RACING 2005-2014 SPARCO STEERING WHEEL OFF-ROAD -- M-3600-R
  • Fits: 2007-2012 5.4L Shelby GT500 and 2013 5.8L Shelby GT500
  • Original equipment on 2013 Mustang Shelby GT500
  • Cast aluminum construction with 8.5 quart capacity
  • Includes combination oil pan gasket, windage tray and scraper
  • Includes pick-up tube and pan bolts.
  • Off-road use only!
  • Fits 2005-2014 Mustang
  • Original equipment on 2013-2014 Mustang Cobra Jet and 2012-2014 Mustang Boss 302S
  • Maybe require custom wiring to retain any factory steering wheel buttons

Fitment requires the following parts available through Sparco

    • 01502067CA Hub Adapter Steering
    • S197/C170015R98TU Quick Release, Steering Wheel Adaptor
2005-2014 MUSTANG PERFORMANCE COOLING FAN -- M-8C607-MSVT POWERMASTER XS TORQUE HIGH TORQUE MINI STARTER 4.6L/5.4/COYOTE 5.0L -- 9532
Our Price:$299.95
List Price:$368.75
Our Price:$299.99
You save $68.76!
2005-2013 MUSTANG PERFORMANCE COOLING FAN -- M-8C607-MSVT POWERMASTER XS TORQUE HIGH TORQUE MINI STARTER 4.6L/5.4/COYOTE 5.0L -- 9532
  • Fits: 2005-2014 Mustang GT  and 2007-2014 Mustang Shelby GT500
  • Original equipment cooling fan on 2013-2014 Mustang Shelby GT500 
  • Added cooling capacity for performance applications
  • Fits 4.6L/5.4L/Coyote 5.0L
  • 4.4:1 Gear Reduction
  • 200 ft-lb rating
  • Small diameter mini-starter great for additional header and oil pan clearance
  • No heat soak problems
  • Weighs 8.5 lbs.  The lightest 200 ft-lb starter available.
  • Machined Billet Aluminum Adapter Block
  • Every starter is individually tested and dyno results sheet is included in the box
  • Starter bolts are not included.  Starter bolts can be sourced from your local Ford Dealer.
  • Brand New.  Not rebuilt or re-manufactured.
  • No core charge
  • Made In USA
HIGH-TORQUE MINI STARTER - MODULAR ENGINES -- M-11000-C50 FORD RACING 2011-2012 SHELBY GT500 19 INCH FORGED TRACK PACK REAR WHEEL -- M-1007-SA1910
Our Price:$329.00
List:$499.95
Introductory Special:$415.95
You save $84.00!

(1)
HIGH-TORQUE MINI STARTER - MODULAR ENGINES -- M-11000-C50 FORD RACING 2011-2012 SHELBY GT500 19 INCH FORGED TRACK PACK REAR WHEEL -- M-1007-SA1910
  • Fits Modular 4.6L, 5.0L TiVCT, 5.4L and 5.8L Engines with RWD and automatic and manual transmissions
  • Compact construction, great for header clearance
  • Weighs approximately 6 lbs.
  • Comes with starter cables and fasteners.
  • Must use diode protected fenderwell solenoid when used in non-production applications. (call techline 800-367-3788 for more details)
  • 2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
  • 19" x 10" wide
  • 5-lug, 4.5" bolt circle
  • 51 mm offset
  • 7.6" backspacing
  • Forged aluminum
  • Dark stainless finish with mid-gloss clear coat
  • Clear coated to OEM standards
  • Same look as production rear wheel on 2011-2012 Mustang Shelby GT500 Track Pack in different diameter and width
  • Includes Ford Racing center cap M-1096-FR1
  • Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
  • Valve stem TPMS compatible
   
 
Ford Racing Parts Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback